Kinematic Calibration of a 2UPR&2RPS Redundantly Actuated Parallel Robot

被引：0
|
作者：
Zhang J. [1 ]
Jiang S. [1 ]
Chi C. [1 ]
机构：
[1] School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2021年 / 57卷 / 15期
关键词：
Error identification; Error modelling; Kinematic calibration; Redundantly actuated parallel robot; Sensitivity analysis;
D O I：
10.3901/JME.2021.15.062
中图分类号：
学科分类号：
摘要：
Kinematic calibration is an effective way to improve the kinematic accuracy of parallel robots. An approach of kinematic calibration is proposed to improve the kinematic accuracy of a 2UPR&2RPS redundantly actuated parallel robot. By projecting the error loop closure equations in the directions of actuation and constraint of each limb, an error model of the robot is established. Based on the established model, the compensable and uncompensable source errors are sorted out. Sensitivity indices are formulated through the derivation of error mapping matrix, based on which a sensitivity analysis is carried out to find out those uncompensable source errors that have relatively "strong" impact on the terminal error. An error identification model is further established by using the regularization method based on a laser tracker. A calibration experiment is performed to verify the validity of the proposed approach. © 2021 Journal of Mechanical Engineering.
引用
收藏
页码：62 / 70
页数：8
相关论文
共 18 条
  • [1] LU Yi, DAI Zhuohong, YE Nijia, Stiffness analysis of parallel manipulators with linear limbs by considering inertial wrench of moving links and constrained wrench, Robotics and Computer-Integrated Manufacturing, 46, pp. 58-67, (2017)
  • [2] WU Jun, WANG Jinsong, WANG Liping, Et al., Dynamics and control of a planar 3-dof parallel manipulator with actuation redundancy, Mechanism and Machine Theory, 44, 4, pp. 835-849, (2009)
  • [3] CHAKER A, MLIKA A, LARIBI M, Et al., Clearance and manufacturing error's effffects on the accuracy of the 3-RCC spherical parallel manipulator, European Journal of Mechanics-A/ Solids, 37, pp. 86-95, (2013)
  • [4] ELATTA A, LI Peigen, FAN Liangzhi, Et al., An overview of robot calibration, Information Technology Journal, 3, 1, pp. 1812-5638, (2004)
  • [5] REN Xiaodong, FENG Zuren, SU Chengping, A new calibration method for parallel kinematics machine tools using orientation constraint, International Journal of Machine Tools and Manufacture, 49, 9, pp. 708-721, (2009)
  • [6] LIU Dawei, WANG Liping, LI Tiemin, Et al., Self-calibration of a class of parallel kinematic machines with redundant kinematic chain, Journal of Mechanical Engineering, 48, 1, pp. 1-6, (2012)
  • [7] KONG Lingyu, CHEN Genliang, ZHANG Zhuang, Et al., Kinematic calibration and investigation of the influence of universal joint errors on accuracy improvement for a 3-dof parallel manipulator, Robotics and Computer-Integrated Manufacturing, 49, pp. 388-397, (2018)
  • [8] CHEN Genliang, KONG Lingyu, LI Qinchuan, Et al., Complete, minimal and continuous error models for the kinematic calibration of parallel manipulators based on POE formula, Mechanism and Machine Theory, 121, pp. 844-856, (2018)
  • [9] SUN Tao, LIAN Bingbing, ZHANG Jiateng, Et al., Kinematic calibration of a 2-dof over-constrained parallel mechanism using real inverse kinematics, IEEE Access, 6, pp. 67752-67761, (2018)
  • [10] SHAO Zhufeng, TANG Xiaoqiang, WANG Liping, Et al., Self-calibration method of planar flexible 3-RRR parallel manipulator, Journal of Mechanical Engineering, 45, 3, pp. 150-155, (2009)
12