Crack Width Calculation of Steel-Concrete Composite Bridge Deck in Negative Moment Region

被引：0
|
作者：
Dai C. [1 ]
Su Q. [1 ]
机构：
[1] College of Civil Engineering, Tongji University, Shanghai
来源：
Su, Qingtian (sqt@tongji.edu.cn) | 1600年 / Science Press卷 / 45期
关键词：
Composite bridge deck; Concrete crack; Crack width; Rebar stress;
D O I：
10.11908/j.issn.0253-374x.2017.06.003
中图分类号：
学科分类号：
摘要：
Five steel concrete composite bridge deck specimens were manufactured and subjected to negative moment loading. It could be observed that the strain of rebar and steel plate of splitting section does not obey the plain-section assumption. The strain of rebar is obviously larger than the value calculated according to the plain-section assumption. Then, a formula which can be used to calculate the rebar stress of cracked section was deduced. The calculating results agreed well with the test values. Finally, different crack width predicting methods were compared. The results show that when using the formula recommended in this paper to calculate the rebar stress, adopting the crack width calculation formula specified in JTG D62 2004 and using the parameters of eccentric tension member, the calculated crack width agrees well with the test values. © 2017, Editorial Department of Journal of Tongji University. All right reserved.
引用
收藏
页码：806 / 813
页数：7
相关论文
共 16 条
  • [1] Zhang Q., Cui C., Bu Y., Et al., Fatigue tests and fatigue assessment approaches for rib-to-diaphragm in steel orthotropic decks, Journal of Constructional Steel Research, 114, (2015)
  • [2] Xu W., Zhang X.N., Experimental and numerical simulation study on the crack of steel orthotropic bridge deck pavement, 6th RILEM International Conference on Cracking in Pavements, (2008)
  • [3] Allahyari H., Dehestani M., Beygi M.H.A., Et al., Mechanical behavior of steel-concrete composite decks with perfobond shear connectors, Steel and Composite Structures, 17, 3, (2014)
  • [4] Code for design of concrete structures: GB 50010-2010, (2010)
  • [5] Code for design of highway reinforced concrete and prestressed concrete bridges and culverts: JTG D62-2004, (2004)
  • [6] Nie J., Zhang M., Study on the crack of concrete flange in tension of composite steel-concrete beams, Journal of Tsinghua University (Science and Technology), 37, 6, (1997)
  • [7] Yu Z., Guo F., Experimental study of crack width in negative bending region of partially prestressed continuous steel-concrete composite beams, Journal of Building Structures, 25, 4, (2004)
  • [8] Zhang Y., Fan J., Li Y., Law of crack development and calculation of crack width of continuous composite beams, Engineering Mechanics, 28, 7, (2011)
  • [9] Zhang Y., Theoretical analysis and experimental research on behavior and crack control of negative moment zone in steel-concrete composite beams, (2009)
  • [10] Ryu H.-K., Chang S.-P., Kim Y.-J., Et al., Crack control of a steel and concrete composite plate girder with prefabricated slabs under hogging moments, Engineering Structures, 27, 11, (2005)
12