Preparation, morphology and thermal properties of rubber-modified polyester resins

被引：0
|
作者：
Munyati, M.O. [1 ]
Lovell, P.A. [2 ]
机构：
[1] Department of Chemistry, University of Zambia, P.O. Box 2379, Lusaka, Zambia
[2] Manchester Materials Science Centre, UMIST, Manchester, M1 7HS, United Kingdom
来源：
E-Polymers | 2007年
关键词：
Elastic moduli - Morphology - Rubber - Thermoanalysis - Transmission electron microscopy;
D O I：
10.1515/epoly.2007.7.1.599
中图分类号：
学科分类号：
摘要：
The preparation of polyester resin blends consisting of an unsaturated polyester resin matrix and rubbery particles comprising three radially-alternating glassy and rubbery layers is described. The morphology of the resin blends was examined by transmission electron microscopy (TEM) while thermal properties were investigated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). The results show that the particles were prepared with good control of particle size and morphology. DMTA results showed no reduction in the Tg of the matrix whilst the shear modulus of modified materials was found to be lower than that of the matrix material.
引用
收藏
页码：1 / 11
相关论文
共 50 条
  • [1] Preparation, morphology and thermal properties of rubber-modified polyester resins
    Munyati, M. O.
    Lovell, P. A.
    E-POLYMERS, 2007,
  • [2] MORPHOLOGY OF SOLID CTBN RUBBER-MODIFIED EPOXY-RESINS
    SOHN, JE
    BULLETIN OF THE AMERICAN PHYSICAL SOCIETY, 1981, 26 (03): : 398 - 399
  • [3] MORPHOLOGY OF SOLID UNCURED RUBBER-MODIFIED EPOXY-RESINS
    SOHN, JE
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1981, 181 (MAR): : 9 - ORPL
  • [4] IMPACT BEHAVIOR AND MORPHOLOGY OF RUBBER-MODIFIED EPOXY-RESINS
    PUCCIARIELLO, R
    VILLANI, V
    BIANCHI, N
    BRAGLIA, R
    ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1991, 187 : 75 - 86
  • [5] THERMAL-BEHAVIOR AND MORPHOLOGY OF RUBBER-MODIFIED EPOXIES
    KIM, WN
    PARK, CE
    BURNS, CM
    JOURNAL OF APPLIED POLYMER SCIENCE, 1993, 50 (11) : 1951 - 1957
  • [6] Morphology of rubber-modified vinyl ester resins cured at different temperatures
    Auad, ML
    Borrajo, J
    Aranguren, MI
    JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 89 (01) : 274 - 283
  • [7] RELATIONSHIP BETWEEN GELATION AND MORPHOLOGY OF RUBBER-MODIFIED EPOXY-RESINS
    PUCCIARIELLO, R
    VILLANI, V
    BIANCHI, N
    BRAGLIA, R
    POLYMER INTERNATIONAL, 1991, 26 (02) : 69 - 73
  • [8] MICROMECHANICS OF RUBBER-MODIFIED THERMOSETTING RESINS
    DOYLE, MJ
    GOLDTHWAIT, RG
    PLASTICS ENGINEERING, 1983, 39 (03) : 46 - 46
  • [9] RUBBER-MODIFIED ISOCYANURATE OXAZOLIDONE RESINS
    NUMATA, S
    KINJO, N
    POLYMER JOURNAL, 1982, 14 (08) : 671 - 673
  • [10] MORPHOLOGY OF RUBBER-MODIFIED PHOTOPOLYMERS
    ORS, JA
    ENNS, JB
    ACS SYMPOSIUM SERIES, 1984, 242 : 345 - 365
12345