Wood Failure Percentage Measurement Method Based on Grayscale and Color Image Processing

被引：0
|
作者：
Yang B. [1 ]
Hao J. [1 ]
Liu T. [1 ]
Xu D. [1 ]
Lu C. [1 ]
机构：
[1] College of Material Science and Engineering, Central South University of Forestry Science and Technology, Changsha
来源：
Jianzhu Cailiao Xuebao/Journal of Building Materials | 2023年 / 26卷 / 03期
关键词：
cross‑laminated timber; experiment; image processing; measurement; wood failure percentage;
D O I：
10.3969/j.issn.1007-9629.2023.03.010
中图分类号：
学科分类号：
摘要：
A fast digital measurement method of cross‑laminated timber wood failure percentage based on grayscale and color image processing was proposed. To verify the feasibility of this method，the shear failure samples prepared with larch and carbonized bamboo as the base material and phenolic resin and isocyanic acid as the adhesives were tested under dry and wet shear conditions. The results show that the wood failure percentage calculated by the gray‑scale and color image processing methods are in good agreement with the experimental values，and the errors meet the requirements of engineering applications. However，the color change of the wood damage level and the wood failure percentage image have a greater impact on the measurement accuracy. Among them，the change of the inherent color of the adhesive has a greater impact on the accuracy of the threshold segmentation gray‑scale wood failure percentage image measurement method，while the environmental impact is the main factor of the color wood failure percentage measurement method of pixel statistics. © 2023 Tongji University. All rights reserved.
引用
收藏
页码：289 / 298
页数：9
相关论文
共 18 条
  • [1] LI M Y, ZHANG S B, GONG Y C，, Et al., Gluing techniques on bond performance and mechanical properties of cross‑laminated timber（CLT）made from Larix kaempferi ［J］, Polymers, 13, 5, (2021)
  • [2] Chao SUN, XIAO Congzhen, LI Jianhui, Et al., Experiment research on seismic behavior of cross‑laminated timber shear wall ［J］, Building Science, 37, 9, (2021)
  • [3] CHEN Guojun, SONG huan, WANG Zhiqiang, Et al., Progress on gluing durability of cross‑laminated timber［J］, China Forest Products Industry, 58, 5, (2021)
  • [4] XIE Lisheng, TAO Jun, LIU Jiacheng, Et al., Study on the influence of gluing properties to russian larch with different types of adhesives［J］, China Forest Products Industry, 56, 12, (2019)
  • [5] HU Xiaoxia, CHEN Peng, XU Zhengdong, Et al., The influencing factors and measuring method of the rate of wood failure［J］, Forestry and Grassland Machinery, 22, 4, (2011)
  • [6] DONG Weiqun, Evaluation of bonding technology and mechanical properties of bamboo‑wood composite cross‑laminated timber［D］, (2019)
  • [7] SIMON A, MAREN H., Bondline shear strength and wood failure of European and tropical hardwood glulams［J］, European Journal of Wood and Wood Products, 76, 4, (2018)
  • [8] ZHOU Haibin, LIU Xiaona, HAN Liuyang, Et al., Influence of adhesive type and finger joint on properties of glulam［J］, Journal of Building Materials, 20, 5, (2017)
  • [9] YU Zedong, Traffic lights recognition with otsu algorithm and Hu invariant momengts ［J］, Journal of Wuhan University （Engineering）, 53, 4, (2020)
  • [10] LI Xiaoye, WANG Kejian, GU Jiancai, Et al., Image processing based on the measurement of opacity and structural relationship ［J］, Journal of Northwest Forestry University, 35, 1, (2020)
12