Intelligent optimization and control technology for drilling process of coal mine tunnels

被引：0
|
作者：
Yao N. [1 ,2 ]
Wu M. [3 ]
Chen L. [3 ]
Lu C. [3 ]
Fan H. [3 ]
Zhang Y. [1 ,2 ]
Li W. [1 ,3 ]
Yao K. [1 ]
机构：
[1] CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an
[2] China Coal Research Institute, Beijing
[3] School of Automаtion, Chinа University of Geosciences, Wuhаn
来源：
Meitiandizhi Yu Kantan/Coal Geology and Exploration | 2023年 / 51卷 / 09期
关键词：
coal mine; intelligent control; intelligent optimization; lithology identification; tunnel drilling;
D O I：
10.12363/issn.1001-1986.23.06.0377
中图分类号：
学科分类号：
摘要：
The harsh environment for drilling construction of coal mine tunnel, complex coal seam structure and complicated operation procedures can cause low drilling efficiency and high drilling cost. For this reason, it is imperative to carry out studies on the optimization and control technology for the drilling process of coal mine tunnel. Herein, study was conducted from intelligent identification of lithology of coal-bearing formation, intelligent optimization of drilling parameters and their intelligent control, focusing on the key technology for control of drilling process of coal mine tunnel. First, in order to accurately determine the type of coal-bearing formation, an intelligent identification model of coal-bearing formation lithology based on BP-Adaboost was established. Then, an intelligent optimization model based on mechanical specific energy and drilling speed was established under different condition of coal-bearing formations, to provide the driller with the reference values of optimal feed pressure and rotational speed. Next, a fuzzy PID-based feed pressure control strategy was proposed to realize the effective control of feed pressure. Finally, field test was implemented in a coal mine in Huainan with the intelligent drilling system of drill rig for coal mine tunnel. The test results indicate that: the identification accuracy of the proposed intelligent identification model for coal-bearing formation lithology is up to 96.75%. The intelligent optimization method improves the drilling rate significantly and reduces the mechanical specific energy, thereby improving the drilling efficiency and reducing the drilling cost. The feed pressure control strategy could stabilize the feed pressure near the optimal value, reduce the overshoot of the feed system while speeding up the system response, thereby ensuring the dynamic response of the feed pressure smoother. Intelligent optimization and control technology for drilling process of coal mine tunnel can effectively guarantee the safe and efficient operation of the drilling process and promote the intelligent development of the drilling technology for coal mine tunnel. © 2023 Science Press. All Rights Reserved.
引用
收藏
页码：1 / 9
页数：8
相关论文
共 26 条
  • [1] (2022)
  • [2] CHEN Gang, WANG Kaibin, JIANG Bici, Et al., Comparison and application of LWD lithology identification method[J], Coal Geology & Exploration, 46, 1, (2018)
  • [3] WANG Jie, XI Kaikai, GUO Yulun, Device research on lithology recognition based on machine learning[J], Science Technology and Industry, 22, 1, (2022)
  • [4] ZHANG Youzhen, ZHANG Ning, SHAO Junjie, Et al., Fuzzy identification of coal –bearing strata lithology based on drilling parameter clustering[J], Journal of China Coal Society, 44, 8, pp. 2328-2335, (2019)
  • [5] WU Zhongyuan, ZHANG Xin, ZHANG Chunlei, Et al., Lithology identification based on LSTM recurrent neural network[J], Lithologic Reservoirs, 33, 3, pp. 120-128, (2021)
  • [6] Yunxin XIE, Chenyang ZHU, ZHOU Wen, Et al., Evaluation of machine learning methods for formation lithology identification：A comparison of tuning processes and model performances[J], Journal of Petroleum Science and Engineering, 160, (2018)
  • [7] Yunxin XIE, Chenyang ZHU, Yue LU, Et al., Towards optimization of boosting models for formation lithology identification[J], Mathematical Problems in Engineering, 2019, (2019)
  • [8] RITTO T G，, SOIZE C, SAMPAIO R., Robust optimization of the rate of penetration of a drill–string using a stochastic nonlinear dynamical model[J], Computational Mechanics, 45, 5, (2010)
  • [9] EREN T, OZBAYOGLU M E., Real time optimization of drilling parameters during drilling operations, SPE Oil and Gas India Conference and Exhibition[C], pp. 1-14, (2010)
  • [10] ZHANG Long, ZHANG He, LIANG Haibo, Et al., A new method to calculate optimal parameters of the minimum mechanical specific energy[J], Information & Communications, 4, (2015)
123