Complex saturation of titanium alloys with boron, chromium and titanium

This work described the technology of boronizing of titanium Grade2 from the generation of the gas phase directly in a sealed container during the decomposition reactions of the powder saturating medium. With such an implementation of the process in a closed volume, waste gas neutralization devices are not required, since the generation and decomposition of active saturating gases occurs in a closed volume. At saturation of titanium from the gas mixture, titanium borides, titanium nitrides, as well as titanium and chromium carbides can be produced in the coating. The microhardness of the coating is 2800-3200 HV0.1. The thickness of the diffusion coatings in this case can be up to75 microns. It is indicated that diffusion coatings on titanium by this technology should not exceed a thickness of more than 100 microns, and if the thickness of the diffusion coating exceeds 100 microns, the risk of chipping will increase. © 2019 Trans Tech Publications Ltd, Switzerland.