Discontinuous impact fatigue failure model and microscopic mechanism of pure titanium under high strain-rate loading

被引:0
|
作者
Hui Y. [1 ]
Xu H. [1 ]
Hao H. [1 ]
Shen J. [1 ,2 ]
机构
[1] School of Aeronautics, Northwestern Polytechnical University, Shaanxi, Xi’an
[2] Shaanxi Key Laboratory of Impact Dynamic and Its Engineering Application, Shaanxi, Xi’an
来源
关键词
impact fatigue; Manson-Coffin model; microstructure; pure titanium;
D O I
10.11883/bzycj-2023-0073
中图分类号
学科分类号
摘要
The fatigue failure behavior of structural materials under repeated impact loads has always attracted much attention. Mastering its damage accumulation process and evolution mechanism at the micro-scale is the fundamental way to understand the impact fatigue failure mechanism. Due to the complexity of the impact fatigue load itself and the limitations of the current experimental equipment, there are still major problems in the study of impact fatigue failure of materials. Therefore, pure titanium was used as the research object and a strain-controlled impact fatigue life test was designed based on the traditional split Hopkinson tension bar system. The strain-controlled impact fatigue life test was achieved by changing the length of the striker, and the amplitude of the incident wave needed to be kept at the same level when using different striker tests. The relationship between strain amplitude and impact fatigue life was analyzed. The impact fatigue interruption experiments of 5 times, 10 times and 20 times were carried out with 100 mm bullets. The microstructure of the samples after different impact times were characterized by electron backscatter diffraction (EBSD) and then the quasi-static mechanical properties were tested. The fracture morphology after impact fatigue failure was observed by scanning electron microscope (SEM). The cyclic hardening/softening law and its microscopic evolution mechanism of pure titanium during impact fatigue failure were studied. The results show that the strain-controlled impact fatigue life test can be realized by changing the striker length. The Manson-Coffin fatigue life model can better reflect the relationship between impact fatigue life and strain amplitude of pure titanium. Moreover, pure titanium exhibits cyclic hardening during impact fatigue failure, which is mainly due to the combined effect of fine grain strengthening caused by twin deformation and strain hardening caused by plastic deformation during fatigue. Finally, the impact fatigue damage of pure titanium is mainly manifested as the loss of deformation ability. © 2024 Explosion and Shock Waves. All rights reserved.
引用
收藏
相关论文
共 22 条
  • [1] pp. 52-57, (2017)
  • [2] XI X., Arresting hook of carrier-based aircraft on aircraft carrier [J], Ordnance Knowledge, 3, pp. 72-75, (2015)
  • [3] JOHNSON A A, STOREY R J., The impact fatigue properties of iron and steel [J], Journal of Sound and Vibration, 308, pp. 458-466, (2007)
  • [4] YANG S S, BAI C Y, YANG Q, Et al., Review on impart fatigue of metallic materials and structures [J], Aeronautical Science & Technology, 32, 2, pp. 1-13, (2021)
  • [5] JGUCHI K T H, TAIRA S., Failure mechanisms in impact fatigue of metals [J], Fatigue and Fracture of Engineering Materials and Srrucfures, 2, 2, pp. 165-176, (1979)
  • [6] NAKAYAMA H, TANAKA T., Impact fatigue crack growth behaviors of high strength low alloy steel [J], International Journal of Fracture, 26, 9, pp. 19-24, (1984)
  • [7] TANAKA T, KINOSHITA K, NAKAYAMA H., Fatigue crack growth and microscopic crack opening behaviour under impact fatigue load [J], International Journal of Fatigue, 11, 2, pp. 117-123, (1989)
  • [8] YANG P, LIAO X, ZHU J, Et al., High strain-rate low-cycle impact fatigue of a medium-carbon alloy steel [J], International Journal of Fatigue, 16, 5, pp. 327-330, (1994)
  • [9] ZHANG M, YANG P S, TAN Y X, Et al., An observation of crack initiation and early crack growth under impact fatigue loading [J], Materials Science and Engineering: A, 271, pp. 390-394, (1999)
  • [10] LI H H, YI D Q, LIU H Q, Et al., Research on impact fatigue behaviour of cemented carbide [J], Cemented Carbide, 31, 2, pp. 100-111, (2014)