Early fault feature extraction of rolling bearing based on optimized VMD and improved threshold denoising

被引：0
|
作者：
Chen P. [1 ]
Zhao X. [1 ,2 ,3 ]
机构：
[1] College of Electrical and Information Engineering, Lanzhou University of Technology, Lanzhou
[2] Gansu Provincial Key Lab of Advanced Control for Industrial Processes, Lanzhou
[3] National Experimental Teaching Center of Electrical and Control Engineering, Lanzhou
来源：
Zhendong yu Chongji/Journal of Vibration and Shock | 2021年 / 40卷 / 13期
关键词：
Fault diagnosis; Feature extraction; Threshold de-noising; Variational modal decomposition (VMD); Whale optimization algorithm (WOA);
D O I：
10.13465/j.cnki.jvs.2021.13.019
中图分类号：
学科分类号：
摘要：
Aiming at the problem of early fault signals of rolling bearing being weak to cause fault feature extraction being difficult under complex working conditions and strong background noise interference, a method of rolling bearing fault feature extraction based on optimized variational mode decomposition (VMD) and improved threshold denoising was proposed. Firstly, VMD was optimized using the whale optimization algorithm (WOA) to realize the adaptive decomposition of vibration signal, and the optimal modal components selection criteria for L-kurtosis and correlation coefficient were established. Then, the improved threshold denoising was performed on the selected optimal components. Finally, Hilbert envelope spectral analysis was performed on the de-noised signals to realize fault feature frequency extraction. The proposed method was verified to adopt simulated signals and the engineering data set of University of Western Reserve in US. At the same time, the proposed method was compared with Teager energy operator denoising method and the optimization method based on envelope entropy criterion. The results showed that the effect of the proposed method is better. © 2021, Editorial Office of Journal of Vibration and Shock. All right reserved.
引用
下载
收藏
页码：146 / 153
页数：7
相关论文
共 22 条
  • [1] LI Juan, CHENG Junsheng, HUANG Zhuqing, Et al., Composite fault diagnosis method of gearbox based on SWD-AVDIF, Noise and Vibration Control, 39, 1, pp. 166-171, (2019)
  • [2] MCFADDEN P D, SMITH J D., Model for the vibration produced by a single point defect in a rolling element bearing, Journal of Sound & Vibration, 96, 1, pp. 69-82, (1984)
  • [3] ZHANG Chen, ZHAO Rongzhen, DENG Linfeng, Et al., Weak fault feature extraction of rolling bearing based on svd-eemd and TEO, Journal of Vibration, Measurement and Diagnosis, 39, 4, pp. 720-726, (2019)
  • [4] KUMAR A, KUMAR R., Role of signal processing, modeling and decision making in the diagnosis of rolling element bearing defect: a review, Journal of Nondestructive Evaluation, 38, 1, (2019)
  • [5] HUAN G N E., The empirical mode decomposition and the hilbert spectrum for nonlinear and nonstationary time series analysis [J], Proceedings of the Royal Society of London A, 454, pp. 903-995, (1998)
  • [6] YEH J R, SHIEH J S, HUANG N E., Complementary ensemble empirical mode decomposition: a novel noise enhanced data analysis method [J], Advances in Adaptive Data Analysis, 2, 2, pp. 135-156, (2010)
  • [7] TORRES M E, COLOMINAS M A, SCHLOTTHAUER G, Et al., A complete ensemble empirical mode decomposition with adaptive noise, Proceedings of the IEEE International Conference on Acoustics, Speech, & Signal Processing, (2011)
  • [8] CHENG Junsheng, ZHANG Kang, YANG Yu, Local mean decomposition method and its application in rolling bearing fault diagnosis, China Mechanical Engineering, 20, 22, pp. 2711-2717, (2009)
  • [9] FREI M G, OSORIO I., Intrinsic time-scale decomposition:time-frequency-energy analysis and real-time filtering ofnon-stationary signals, Proceedings of the Royal Society A, 463, pp. 321-342, (2007)
  • [10] FREI M G, OSORIO I., Intrinsic time-scale decomposition:time frequency-energy analysis and real-time filtering of nonstationary signals, Proceedings of the Royal Society of London A, 2078, 463, pp. 321-342, (2006)
123