Penetration Performance of the Torso Flexible Protective Gear Inspired by Armadillo Scale Structure Against Armor-piercing Incendiary Bullets

被引:0
|
作者
Zhu D. [1 ,2 ,3 ]
Wang D. [1 ,2 ]
机构
[1] College of Civil Engineering, Hunan University, Changsha
[2] Key Laboratory for Green & Advanced Civil Engineering Materials and Application Technology of Hunan Province, Hunan University, Changsha
[3] Shandong Tianyi High Technology Co. ,Ltd., Jining
关键词
ballistic tests; biomimetics; composite scales; flexibility; penetration;
D O I
10.16339/j.cnki.hdxbzkb.2023316
中图分类号
学科分类号
摘要
Based on the structure and morphology of the armadillo outer skin armor,this paper designed a bionic double-layer composite scale composed of SiC ceramic and ultra-high molecular weight polyethylene (UHMWPE)as well as a new type of flexible protective gear. The flexible protective gear consisted of an upper scale layer and a lower backing layer,in which the scale layer consisted of periodically arranged composite scales,and the cushion layer was made of UHMWPE layers. The flexibility test was carried out using the MTS C43 electronic universal testing machine,and ballistic tests were conducted in accordance with the ballistic protection performance requirements of standard III in the Military bulletproof vest safety technical performance requirements"(GJB 4300A ―2012). Then,the influences of the thickness ratio of the composite scales,ceramic thickness,number of backing layers,and penetration position of the armor-piercing incendiary bullet on the protective performance of the torso’s flexible protective gear ware analyzed,and the change process of the rigidity of the protective gear under concentrated load was discussed. The results show that the new type of flexible protective gear has good protective performance,and different penetration areas have a significant impact on the damage range;the cushion layer limits the bending deformation of the scale layer under concentrated load and reduces the overall flexibility. The research results of this paper can provide valuable references for the design and performance improvement of torso flexible protective gear. © 2023 Hunan University. All rights reserved."
引用
收藏
页码:147 / 154
页数:7
相关论文
共 21 条
  • [1] MOGAS-SOLDEVILA L, MetaMesh:a hierarchical computational model for design and fabrication of biomimetic armored surfaces[J], Computer-Aided Design, 60, pp. 14-27, (2015)
  • [2] ZHU D J,, WANG D, YANG J J., Research progress on biological armors and biomimetic scale-like flexible protection gears[J], Journal of Hunan University(Natural Sciences), 50, 6, pp. 199-212, (2023)
  • [3] LANGDON G S, Dynamic response of Dyneema® HB26 plates to localised blast loading[J], International Journal of Impact Engineering, 73, pp. 91-100, (2014)
  • [4] WANG Y P, Impact resistance of shear thickening fluid/Kevlar composite treated with shear-stiffening gel [J], Composites Part A:Applied Science and Manufacturing, 106, pp. 82-90, (2018)
  • [5] Novel dynamic compressive and ballistic properties in 7075-T6 Al-matrix hybrid composite reinforced with SiC and B4C particulates[J], Composites Part B:Engineering, 174, (2019)
  • [6] Ballistic performance of Al<sub>2</sub>O<sub>3</sub> mosaic armors with gap-filling materials[J], Ceramics International, 43, 2, pp. 2697-2704, (2017)
  • [7] WANG Z Q,, TANG X J, WANG X T, Numerical simulation on the oblique penetration of ceramic particles reinforced metal matrix functional gradient armor[J], Key Engineering Materials, 577, 578, pp. 585-588, (2013)
  • [8] WEI Z,XU X., FEM Simulation on impact resistance of surface gradient and periodic layered bionic composites[J], Composite Structures, 247, 7, (2020)
  • [9] RAWAT P, ZHU D J, RAHMAN M Z, Structural and mechanical properties of fish scales for the bio-inspired design of flexible body armors:a review[J], Acta Biomaterialia, 121, pp. 41-67, (2021)
  • [10] ZHU D J, ZHANG C H,, LIU P, Comparison of the morphology,structures and mechanical properties of teleost fish scales collected from new zealand [J], Journal of Bionic Engineering, 16, 2, pp. 328-336, (2019)