Experimental Study on Vibration Characteristics and Vibration Reduction Effect of Subway Track Before and After Reconstruction

被引:0
|
作者
He K. [1 ,2 ]
Li T. [3 ,4 ]
Zhou Z. [1 ]
Xiao X. [1 ]
Chi M. [1 ]
Tao G. [1 ]
机构
[1] State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu
[2] Zhengzhou Metro Group Co.,Ltd., Zhengzhou
[3] China Railway First Group Co.,Ltd., Xi'an
[4] China Railway First Group Xinyun Engineering Co.,Ltd., Xianyang
关键词
building vibration; floating rail fastener; secondary noise; track vibration characteristics; vehicle vibration and noise;
D O I
10.16450/j.cnki.issn.1004-6801.2023.04.013
中图分类号
学科分类号
摘要
Because of the problem that residents along a subway often complain about excessive vibration noise,the conventional fasteners originally used were reconstructed into floating rail fasteners to reduce the impact of vibration and noise. The characteristics of track vibration,vehicle vibration and noise,building vibration and secondary noise are analyzed by measuring the vibration and noise when the train passes through the section before and after reconstruction. As compared with the conventional fastener track before transformation,the root mean square values of the vertical vibration accelerations of the rail,track bed,and tunnel wall of the floating rail fastener track are reduced by 8%,70.6%,and 71.4% respectively,and the reduction of tunnel wall vibration is the most significant,and the track vibration reduction effect by the tunnel wall vertical vibration is 8.28 dB. The maximum sound pressure level in the bogie area and in the interior is reduced by 3.6% and 3.4%. The average vibration levels of buildings and the secondary radiation noise in the daytime are reduced by 18.4% and 22.0%. The main frequency of vehicle,track and building vibration and secondary noise is highly close to the P2 resonance frequency of the wheel-rail system,which is one of the main reasons for the vehicle,track and building vibration. The research results of this paper provide a greatly important reference for controlling the vibration and noise problems caused by the subway. © 2023 Nanjing University of Aeronautics an Astronautics. All rights reserved.
引用
收藏
页码:717 / 724+829
相关论文
共 22 条
  • [1] LEI Xiaoyan, WANG Quanjin, SHENG Xiaozhen, Study on environmental vibration and vibration noise induced by the urban rail transit system[J], Journal of the China Railway Society, 25, 5, pp. 109-113, (2003)
  • [2] HONG Junqing, LIU Qingwei, Analysis of effects induced by subway train on surrounding building vibration [J], Journal of Vibration and Shock, 25, 4, pp. 142-145, (2006)
  • [3] HAN Yitao, Analysis of reducing vibration and noise of urban mass transit and engineering measures for them [J], Journal of Railway Engineering Society, 27, 2, pp. 85-88, (2010)
  • [4] DI Chuanzhi, SUN Xiaoming, In situ experiment and analysis of vibration induced by urban subway transit with different track structures[J], Environmental Pollution & Control, 33, 11, pp. 54-57, (2011)
  • [5] MATSUMOTO N,, Et al., Dynamic load, resistance and environmental performance of floating ladder track [J], Quarterly Report of RTRI, 45, 3, pp. 149-155, (2004)
  • [6] DENG Y S, ZOU Y W,, Et al., Dynamic analysis of rail transit elevated bridge with ladder track [J], Frontiers of Structural and Civil Engineering, 3, 1, pp. 2-8, (2009)
  • [7] YANG Xinwen, HE Zhenxing, Vibration characteristics of ladder sleeper track[J], Journal of Vibration Engineering, 25, 4, pp. 388-393, (2012)
  • [8] ZHAN Jianwang, XIA He, ZENDA Yasuo, Et al., Experimental study on the noise reduction performance of the ladder sleeper track on the elevated bridges of urban rail transit[J], China Railway Science, 32, 1, pp. 36-40, (2011)
  • [9] DERE Y., Effectiveness of the floating slab track system constructed at Konya Light Rail[J], Measurement, 89, pp. 48-54, (2016)
  • [10] ESZTER L., Mitigation of railway noise and vibration concentrating on the“reducing at source”methods[J], Intersections/Intersectii, 1, 2, pp. 3-11, (2004)