Complete Stress-strain Curves of Seawater Sea Sand Recycled Aggregate Concrete Under Uniaxial Compression

被引：0
|
作者：
Zhang K. [1 ,2 ]
Xiao J. [1 ,2 ,3 ]
Zhang Q. [2 ]
机构：
[1] College of Civil Engineering, Tongji University, Shanghai
[2] College of Civil Engineering, Fuzhou University, Fuzhou
[3] State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University, Shanghai
来源：
Tongji Daxue Xuebao/Journal of Tongji University | 2021年 / 49卷 / 12期
关键词：
Complete stress-strain curves; Porosity; Recycled aggregate concrete (RAC); Seawater and sea sand; Strain rate;
D O I：
10.11908/j.issn.0253-374x.21085
中图分类号：
学科分类号：
摘要：
To explore the mechanical properties of seawater sea sand recycled aggregate concrete (SSRAC), SSRAC prisms were designed with different mix proportions. The complete stress-strain curves were tested under uniaxial compression with the strain rates of 10-5 s-1 and 10-2 s-1. Failure modes of specimens and the peak stress, strain at peak stress and elastic modulus were analyzed. And the effects of the strain rate, replacement ratio of recycled coarse aggregate (RCA) and shell particle contents on the above indices as well as the dynamic increase factor (DIF) were discussed. Meanwhile, the pore distribution of SSRAC from computed tomography (CT) tests was used to explain the development of characteristic indices of stress-strain curves. Finally, based on the existing uniaxial compression constitutive models of RAC, the predicted complete stress-strain curve was obtained by taking the DIF of characteristic indices and the modified shape factor of descending branch into account. © 2021, Editorial Department of Journal of Tongji University. All right reserved.
引用
收藏
页码：1738 / 1745
页数：7
相关论文
共 18 条
  • [1] XIAO J Z, QIANG C B, NANNI A, Et al., Use of sea-sand and seawater in concrete construction: current status and future opportunities, Construction and Building Materials, 155, (2017)
  • [2] CAO Xueqing, ZHANG Yong, HE Yongjun, Et al., Retrospect and discussion of surveys for construction sand in China offshore area, Marine Geology & Quaternary Geology, 28, 3, (2008)
  • [3] TENG J G, YU T, DAI J G, Et al., FRP composites in new construction: current status and opportunities, Proceedings of the 7th National Conference on FRP Composites in Infrastructure, (2011)
  • [4] XIAO Jianzhuang, ZHANG Kaijian, CAO Wanlin, Et al., Time-dependent reliability-based design of recycled aggregate concrete structures, Journal of Building Structures, 41, 12, (2020)
  • [5] XIAO Jianzhuang, Recycled concrete, (2008)
  • [6] XIAO J Z, ZHANG Q T, ZHANG P, Et al., Mechanical behavior of concrete using seawater and sea-sand with recycled coarse aggregates, Structural Concrete, 20, 5, (2019)
  • [7] GUO M, HU B, XING F, Et al., Characterization of the mechanical properties of eco-friendly concrete made with untreated sea sand and seawater based on statistical analysis, Construction and Building Materials, 234, (2020)
  • [8] Standard practice for the preparation of substitute ocean water: D1141-98, (2013)
  • [9] Technical code for application of sea sand concrete: JGJ 206-2010, (2010)
  • [10] Fine and coarse aggregates for concrete, determination of the particle mass-per-volume and water absorption, pycnometer method: ISO 7033: 1987, (2014)
12