Optimum Design of Pressure Regulating Valve in Vehicle Shift System

被引：0
|
作者：
Wei L. [1 ]
Li W. [1 ]
Liu Z. [1 ]
Luo X. [2 ]
An Y. [1 ]
Xiang K. [1 ]
机构：
[1] College of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou
[2] National Key Laboratoray of Vehicular Transmission, China North Vehicle Research Institute, Beijing
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2019年 / 50卷 / 10期
关键词：
AMESim; Oil filling process; Optimization; Pressure regulating valve; Vehicle shift system;
D O I：
10.6041/j.issn.1000-1298.2019.10.042
中图分类号：
学科分类号：
摘要：
During the progress of oil filling in the vehicle, the deviation between actual pressure and ideal pressure always affects the shift quality. For enhancing the shift quality, the model for simulation of the vehicle shift system was established, which included fuel supply unit, electromagnetic reversing valve, pressure regulating valve and clutch. The oil filling progress was simulated and analyzed in AMESim. Taking the oil filling pressure as optimization target, the optimized function was obtained on the basis of the error integral criterion. In pressure regulating valve, the key parameters affecting the oil filling pressure were obtained by the Pareto diagram as follows: the opening of the valve, the spring preloading force and the diameter of damping hole. Non-linear programming by quadratic Lagrangian and genetic algorithms were respectively applied to optimize parameters above. According to the comparison between the optimized simulation oil filling curve and the ideal oil filling curve, the genetic algorithm was defined as the optimal algorithm, and the optimal structural parameters of the pressure regulating valve were determined. Based on the variable controlling approach, the experimental schemes were designed. The results of the experiments showed that the stability of the optimal shift system was improved to some extent, and the optimal oil filling process was more close to the ideal oil filling process, providing a reliable reference for improving the shift quality. © 2019, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码：360 / 366
页数：6
相关论文
共 22 条
  • [1] Galvagno E., Velardocchia M., Vigliani A., Dynamic and kinematic model of a dual clutch transmission, Mechanism & Machine Theory, 46, 6, pp. 794-805, (2011)
  • [2] Wang J., Chen H., Xu N., Research on the method of improving the acceleration performance of tracked vehicle with hydrodynamic mechanic automatic transmission, Acta Armamentarii, 29, 4, pp. 385-389, (2008)
  • [3] Sun W., Chen H., Control strategy as shifting progress with an electronic automatic transmission, Transactions of the Chinese Society for Agricultural Machinery, 39, 12, pp. 23-26, (2008)
  • [4] Kim D.C., Kim K.U., Park Y.J., Et al., Analysis of shifting performance of power shuttle transmission, Journal of Terramechanics, 44, 1, pp. 111-122, (2007)
  • [5] Li H., Wang Y., Xiong C., Et al., Effect of radial temperature gradient on interface pressure of clutch friction pair, Journal of Mechanical Engineering, 54, 1, pp. 136-143, (2018)
  • [6] Wheals J.C., Crewe C., Ramsbottom M., Et al., Automated manual transmissions-a European survey and proposed quality shift metrics, SAE World Congress & Exhibition, (2002)
  • [7] Goka H., Speed change control system of automative transmission
  • [8] Chen Q., Qin D., Ye X., Optimal slip control about lock-up clutch of torque converter, China Mechanical Engineering, 20, 22, pp. 2663-2667, (2009)
  • [9] Xiang C., He H., Liu H., Et al., Transient dynamic analysis of tracked vehicle transmission during gear shift process, Transactions of the Chinese Society for Agricultural Machinery, 47, 4, pp. 288-293, (2016)
  • [10] Zhu Z., Chen L., Cao L., Et al., Analysis on the shift quality of hydro-mechanical continuously variable transmission, Mechanical Design, 35, 1, pp. 39-45, (2018)
123