Robot Trajectory Tracking Control Based on Reference Trajectory Real-time Modification

被引:0
|
作者
Xiao F. [1 ]
Li G. [1 ]
Zhang X. [1 ]
Tao B. [2 ]
Jiang G. [2 ]
Li G. [1 ]
机构
[1] Key Laboratory of Metallurgical Equipment and Control Technology, Ministry of Education, Wuhan University of Science and Technology, Wuhan
[2] Institute of Precision Manufacturing, Wuhan University of Science and Technology, Wuhan
[3] College of Mechanical Engineering, Hunan University of Technology, Zhuzhou
关键词
PD control; reference trajectory; robot; trajectory tracking;
D O I
10.6041/j.issn.1000-1298.2023.02.046
中图分类号
学科分类号
摘要
A simple and effective control method for robot trajectory tracking with uncertain dynamics was presented. The core idea of the proposed method was to modify the reference trajectory in real-time. The main operation of this method was to accumulate the generated tracking errors and compensate them feedforward in real-time to the points to be tracked on the reference trajectory. Firstly, the control block diagram for the proposed method was showed. Then, the equation for the relationship between the tracking error and the command error was derived from the control block diagram. The equation showed that the control algorithm in the controller only needed to ensure that the velocity error was stable and the tracking error would converge. The increase in compensation gain can also accelerate the convergence of the error. Subsequently, the convergence condition that PD control law can satisfy the proposed method was analyzed. At the same time, the adjustment scheme of parameters in the proposed method was given. Finally, the effectiveness of the proposed method was verified by simulation and physical experiment. In the physical experiment, the absolute value of error obtained from tracking trajectory 1 of each joint was no more than 0. 0087 rad; the absolute value of error obtained from tracking trajectory 2 of each joint was no more than 0. 0059 rad. © 2023 Chinese Society of Agricultural Machinery. All rights reserved.
引用
收藏
页码:441 / 449
页数:8
相关论文
共 39 条
  • [1] XIAO F, LI G, JIANG D, Et al., An effective and unified method to derive the inverse kinematics formulas of general six-DOF manipulator with simple geometry, Mechanism and Machine Theory, 159, (2021)
  • [2] LLAMA M A, KELLY R, SANTIBANWZ V., Stable computed-torque control of robot manipulators via fuzzy self-tuning, IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 30, 1, pp. 143-150, (2000)
  • [3] WANG H., Adaptive control of robot manipulators with uncertain kinematics and dynamics, IEEE Transactions on Automatic Control, 62, 2, pp. 948-954, (2016)
  • [4] GUO Qinghe, ZHAO Dingxuan, ZHAO Xiaolong, Et al., Internal model control in position control of active suspension electrohydraulic servo actuator, Transactions of the Chinese Society for Agricultural Machinery, 51, 12, pp. 394-404, (2020)
  • [5] LIU H, TIAN X, WANG G, Et al., Robust H8 finite-time stability control of a class of nonlinear systems, Applied Mathematical Modelling, 40, 7-8, pp. 5111-5122, (2016)
  • [6] CHEN Qingcheng, ZHU Shiqiang, JIANG Yu, Et al., Nonlinear fuzzy SMC algorithm for hydraulic-driven exoskeleton robot system[J], Transactions of the Chinese Society for Agricultural Machinery, 48, 4, pp. 355-361, (2017)
  • [7] FALLAHA C J, SAAD M, KANAAN H Y, Et al., Sliding-mode robot control with exponential reaching law, IEEE Transactions on Industrial Electronics, 58, 2, pp. 600-610, (2010)
  • [8] BAEK J, JIN M, HAN S., A new adaptive sliding-mode control sch erne for application to robot manipulators, IEEE Transactions on Industrial Electronics, 63, 6, pp. 3628-3637, (2016)
  • [9] HE W, OUYANG Y, HONG J., Vibration control of a flexible robotic manipulator in the presence of input deadzone, IEEE Transactions on Industrial Informatics, 13, 1, pp. 48-59, (2016)
  • [10] WAI R J, MUTHUSAMY R., Design oí fuzzy-neural-network-inherited backstepping control lor robot manipulator including actuator dynamics, IEEE Transactions on Fuzzy Systems, 22, 4, pp. 709-722, (2013)