Dynamic Characteristics of Underwater Explosion Bubble near Rigid Cylinder

被引:0
|
作者
Li Y. [1 ]
Xi R. [1 ]
机构
[1] School of Mechanical Engineering, Beijing Institute of Technology, Beijing
关键词
jet; rigid cylinder; underwater explosion bubble; volume of fluid(VOF);
D O I
10.15918/j.tbit1001-0645.2021.254
中图分类号
学科分类号
摘要
To study the dynamic characteristics of underwater explosion bubbles near a rigid cylinder, a numerical model was established based on the Navier-Stokes equation combined with the volume of fluid method (VOF) to capture the gas-liquid two-phase interface, Using capacitor discharge to generate underwater explosion bubbles and using a high-speed camera to record the pulsation of the bubbles, some experiments were carried out. The experimental results were compared with the numerical simulation results to verify the validity of the numerical model. The numerical simulation results provide detailed information of the flow field of the interaction between the bubble and the rigid cylinder. The results show that the bubble pulsates near the rigid cylinder can make the fluid medium on the surface of the rigid cylinder form a velocity gradient, and the fluid layer with higher velocity can make the bubble form different bubble shapes. Finally, a dimensionless parameter was defined to characterize the relative distance between the bubble and the rigid cylinder, and the influence of the distance parameter on jet impact pressure, maximum jet velocity and bubble core movement was studied. The results show that, with the increase of the distance parameter, the jet impact pressure gradually decreases, and the maximum jet velocity inside the bubble increases first and then decreases, the deviation of the bubble core decreases with the increase of the distance parameter. © 2022 Beijing Institute of Technology. All rights reserved.
引用
收藏
页码:1002 / 1008
页数:6
相关论文
共 21 条
  • [1] ZHU Rongsheng, FU Qiang, LI Weibing, Numerical simulation of 3D two-phase cavitation flow in impeller of the low specific speed centrifugal pump[J], Transactions of The Chinese Society of Agricultural Machinery, 37, 5, pp. 75-79, (2006)
  • [2] MIHATSCH M S, SCHMIDT S J, ADAMS N A., Cavitation erosion prediction based on analysis of flow dynamics and impact load spectra[J], Physics of Fluids, 27, 10, (2015)
  • [3] KLASEBOER E, HUNG K C, WANG C, Et al., Experimental and numerical investigation of dynamics of an underwater explosion bubble near a resilient/rigid structure[J], Journal of Fluid Mechanics, 537, pp. 387-413, (2005)
  • [4] CUI P, ZHANG A M, WANG S P., Small-charge underwater explosion bubble experiments under various boundary conditions[J], Physics of Fluids, 28, 11, (2016)
  • [5] CHAHINE G L, KAPAHI A, CHOI J K, Et al., Modeling of surface cleaning by cavitation bubble dynamics and collapse[J], Ultrasonics Sonochemistry, 29, pp. 528-549, (2016)
  • [6] LAIS H, LOWE P S, GAN T H, Et al., Numerical modelling of acoustic pressure fields to optimize the ultrasonic cleaning technique for cylinders[J], Ultrasonics Sonochemistry, 45, pp. 7-16, (2018)
  • [7] OHL C D, ARORA M, DIJKINK R, Et al., Surface cleaning from laser-induced cavitation bubbles[J], Applied Physics Letters, 89, 7, (2006)
  • [8] YU Yong, LUO Song, Study of dynamic model for bubble impact and bounce from rigid wall[J], Transactions of Beijing Institute of Technology, 40, 6, pp. 581-591, (2020)
  • [9] HENG KWONG T, KOCH D L., Observations of high Reynolds number bubbles interacting with a rigid wall[J], Physics of Fluids, 9, 1, pp. 44-56, (1997)
  • [10] TOMITA Y, ROBINSON P B, TONG R P, Et al., Growth and collapse of cavitation bubbles near a curved rigid boundary[J], Journal of Fluid Mechanics, 466, pp. 259-283, (2002)