Information separation of multi-surface based on wavelength phase-shifting interferometry

被引：0

作者：

Yu Y. ^{[1
]}

Chang L. ^{[1
]}

Yan K. ^{[1
]}

Zheng W. ^{[1
]}

Xu Q. ^{[1
]}

Wang C. ^{[1
]}

Sun T. ^{[2
]}

机构：

[1] School of Mechatronic Engineering and Automation, Shanghai University, Shanghai

[2] Shanghai Pudong Development Bank, Shanghai

来源：

Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2020年 / 49卷 / 03期

关键词：

Design of window function; Information separation of multi-surface; Wavelength phase-shifting; Weighted multi-step sampling algorithm;

D O I：

10.3788/IRLA202049.0303014

中图分类号：

学科分类号：

摘要：

The simultaneous non-contact measurement of the front and rear surfaces of parallel plates by using wavelength phase-shifting interference technology was of great significance in the field of optical determination. A time-domain weighting algorithm was proposed to solve the overlapping interference signals of the front and rear surfaces of parallel plates: weighted 36-step sampling algorithm. Firstly, based on the principle and constraints of the algorithm, the basic distribution parameters of the weighted multi-step sampling algorithm were designed, and then the sampling weights of the interference signals of front surface, rear surface and thickness variance were obtained. Through the calculation of the basic distribution parameters, the sampling weight of each surface can be obtained, and the initial phase distribution of each interference information can be obtained by using the weight operation. Based on Zernike polynomials, the simulation of multi-surface interference phase solution was carried out, and the maximum error between the simulation result and the true value was not more than 0.06 nm. In addition, the influence of various errors on the measurement results was analyzed. A parallel plate with a thickness of 20 mm has been measured. The experiment verifies the effectiveness of the algorithm in the actual measurement process. © 2020, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.

引用

共 14 条

[1] Kim Y., Hibino K., Sugita N., Et al., Design of phase shifting algorithms: fringe contrast maximum, Optics Express, 22, 15, (2014)
[2] Larkin K.G., Oreb B.F., Design and assessment of symmetrical phase-shifting algorithms, Journal of the Optical Society of America A, 9, 10, pp. 1740-1748, (1992)
[3] Chatterjee S., Noncontact thickness measurement of plane-parallel transparent plates with a lateral shearing interferometer, Optical Engineering, 46, 3, (2007)
[4] Kumar Y.P., Chatterjee S., Simultaneous determination of refractive index and thickness of moderately thick plane-parallel transparent glass plates using cyclic path optical configuration setup and a lateral shearing interferometer, Applied Optics, 51, 16, (2012)
[5] Kim Y., Hibino K., Sugita N., Et al., Simultaneous measurement of surface shape and optical thickness using wavelength tuning and a polynomial window function, Optics Express, 23, 25, pp. 32869-32880, (2015)
[6] Sun T., Zheng W., Yu Y., Et al., Determination of surface profiles of transparent plates by means of laser interferometry with wavelength tuning, Optics and Lasers in Engineering, 115, pp. 59-66, (2019)
[7] Sun T., Asundi A.K., Valyukh S., Algorithm for surfaces profiles and thickness variation measurement of a transparent plate using a fizeau interferometer with wavelength tuning, Applied Sciences, 9, 11, (2019)
[8] Kim Y., Hibino K., Kizaki T., Et al., Simultaneous interferometric measurement of the absolute thickness and surface shape of a transparent plate using wavelength tuning Fourier analysis and phase shifting, Precision Engineering, 48, pp. 347-351, (2017)
[9] Huang L., Asundi A.K., Phase retrieval from reflective fringe patterns of double-sided transparent objects, Measurement Science and Technology, 23, 8, (2012)
[10] Yu H., Aleksoff C., Ni J., Thickness measurement of transparent plates by wavelength stepping and a phase unwrapping algorithm, Measurement Science and Technology, 24, 7, (2013)

← 1 2 →