Design and Key Technology Development of Permanent Magnet Assisted Synchronous Reluctance Motor

被引：0
|
作者：
Xu M. [1 ]
Liu G. [1 ]
Chen Q. [1 ]
Zhao W. [1 ]
机构：
[1] Jiangsu Key Laboratory of Drive and Intelligent Control for Electric Vehicle Zhenjiang, School of Electrical and Information Engineering, Jiangsu University, Zhenjiang, 212013, Jiangsu Province
来源：
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering | 2019年 / 39卷 / 23期
基金：
中国国家自然科学基金;
关键词：
Development; High fault tolerance performance design; Mechanical stress; Operation principle; Permanent magnet assisted synchronous reluctance motor (PMaSynRM); Torque ripple suppression;
D O I：
10.13334/j.0258-8013.pcsee.182323
中图分类号：
学科分类号：
摘要：
The permanent magnet assisted synchronous reluctance motor (PMaSynRM) combines the advantages of permanent magnet synchronous motor and synchronous reluctance motor, such as high torque/power density, wide speed range and high-cost performance. It has broad application prospects in the fields of electric vehicles, medical equipments, and aerospaces. This paper firstly introduced the working principle of PMaSynRM and discussed the research work of PMaSynRM at home and abroad. Then, researches about the PMaSynRM were summarized through the following aspects: the mechanical stress, the torque ripple suppression, and high fault tolerance performance design. Finally, the developing trends of PMaSynRM were analyzed based on the development status of PMaSynRM. © 2019 Chin. Soc. for Elec. Eng.
引用
收藏
页码：7033 / 7043
页数：10
相关论文
共 55 条
  • [1] Glehn G., Steentjes S., Hameyer K., Pulsed-field magnetometer measurements and pragmatic hysteresis modeling of rare-earth permanent magnets, IEEE Transactions on Magnetics, 54, 3, (2018)
  • [2] Dieterle O., Greiner T., Heidrich P., Control of a PMSM with quadruple three-phase star-connected windings under inverter short-circuit fault, IEEE Transactions on Industrial Electronics, 66, 1, pp. 685-695, (2019)
  • [3] Deng W., Zuo S., Comparative study of sideband electromagnetic force in internal and external rotor PMSMs with SVPWM technique, IEEE Transactions on Industrial Electronics, 66, 2, pp. 956-966, (2019)
  • [4] Vagati A., Pastorelli M., Francheschini G., Et al., Design of low-torque-ripple synchronous reluctance motors, IEEE Transactions on Industry Applications, 34, 4, pp. 758-765, (1998)
  • [5] Boazzo B., Vagati A., Pellegrino G., Et al., Multipolar ferrite-Assisted synchronous reluctance machines: a general design approach, IEEE Transactions on Industrial Electronics, 62, 2, pp. 832-845, (2015)
  • [6] Guo W., Zhao Z., Analysis of the relation between the electro-magnetic parameters and the structure of synchronous reluctance permanent magnetic motors, Proceedings of the CSEE, 25, 11, pp. 124-128, (2005)
  • [7] Trancho E., Ibarra E., Arias A., Et al., PM-assisted synchronous reluctance machine flux weakening control for EV and HEV applications, IEEE Transactions on Industrial Electronics, 65, 4, pp. 2986-2995, (2018)
  • [8] Lu Y., Li J., Qu R., Et al., Electromagnetic force and vibration analysis of permanent-magnet-assisted Synchronous Reluctance Machines, IEEE Transactions on Industry Applications, 54, 5, pp. 4246-4256, (2018)
  • [9] Arafat A.K.M., Choi S., Active current harmonic suppression for torque ripple minimization at open-phase faults in a five-phase PMa-SynRM, IEEE Transactions on Industrial Electronics, 66, 2, pp. 922-931, (2019)
  • [10] Payza O., Demir Y., Aydin M., Investigation of losses for a concentrated winding high-speed permanent magnet-assisted synchronous reluctance motor for washing machine application, IEEE Transactions on Magnetics, 54, 11, (2018)
123456