Synergistic lubrication and fracture mechanisms of composite surface textures

被引：1
|
作者：
Zhang, Haohan [1 ]
Ni, Jing [1 ]
Yang, Lingqi [1 ]
Feng, Kai [1 ]
Meng, Zhen [1 ]
Zhu, Zefei [1 ]
机构：
[1] Hangzhou Dianzi Univ, Sch Mech Engn, Hangzhou, Peoples R China
来源：
TRIBOLOGY INTERNATIONAL | 2024年 / 198卷
基金：
中国国家自然科学基金;
关键词：
Nylon fibres; Composite surface textures; Lubrication; Fracture behaviour; WEAR BEHAVIOR; FRICTION; MICROSTRUCTURE; WETTABILITY; FORCES;
D O I：
10.1016/j.triboint.2024.109866
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The synergistic interaction of fibres implanted in grooves can enhance tribological behaviour of a contact interface. By comparing the tribological performance characteristics of structures with smooth surfaces (SSs) and grooved surfaces (GSs) and two composite textures with different flocking densities (FS1 and FS2), the friction mechanism of the sliding interface is revealed. The results indicate a 27.51 % reduction in the coefficient of friction (COF) of FS2 sample compared to that of SS sample. Due to its buffering and lubricating effects, the synergistic interaction between the grooves and fibres effectively reduces the fluctuations in friction behaviour and improves surface morphology. Importantly, FS2 enhances the bearing capacity and barrier effect of the surface, thereby inhibiting the fracture behaviour. These results clarify the lubrication and fracture mechanisms of this composite surface textures.
引用
收藏
页数：14
相关论文
共 50 条
  • [1] Characteristics of rolling interface lubrication considering contact surface textures in mixed lubrication
    Wang, Qiaoyi
    Zhang, Lukuan
    Zhang, Zhen
    Tao, Ping
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2024,
  • [2] Analysis of Dimensions of Surface Textures on Lubrication and Friction of an Engine
    Hua, Wenlin
    Vanliem Nguyen
    Vanquynh Le
    SAE INTERNATIONAL JOURNAL OF ENGINES, 2022, 15 (01) : 3 - 13
  • [3] Construction of biomimetic textures and modification of self-lubrication mechanisms on the surface of sulfonated polyether ether ketone films
    Qiu, Yong
    Jia, Xiaohua
    Shan, Zhiqiang
    Wang, Ding
    Yang, Jin
    Wang, Zhaofeng
    Song, Haojie
    JOURNAL OF MATERIALS SCIENCE, 2024, 59 (36) : 16932 - 16946
  • [4] Analysis of fracture mechanisms and surface quality in drilling of composite materials
    J. Sedláček
    A. Humár
    Strength of Materials, 2008, 40 : 40 - 43
  • [5] ANALYSIS OF FRACTURE MECHANISMS AND SURFACE QUALITY IN DRILLING OF COMPOSITE MATERIALS
    Sedlacek, J.
    Humar, A.
    STRENGTH OF MATERIALS, 2008, 40 (01) : 40 - 43
  • [6] Combined lubrication effectiveness of surface textures on diesel cylinder liners
    Yin, B.-F. (ybf@ujs.edu.cn), 1600, Chinese Society for Internal Combustion Engines (32):
  • [7] Optimization of surface textures in hydrodynamic lubrication through the adjoint method
    Codrignani, A.
    Savio, D.
    Pastewka, L.
    Frohnapfel, B.
    van Ostayen, R.
    TRIBOLOGY INTERNATIONAL, 2020, 148
  • [8] Homogenization-based design of surface textures in hydrodynamic lubrication
    Waseem, A.
    Temizer, I.
    Kato, J.
    Terada, K.
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2016, 108 (12) : 1427 - 1450
  • [9] Theoretical and experimental study on lubrication performance of composite textures on cylinder liners
    Yin, Bifeng
    Qian, Yanqiang
    Lu, Zhentao
    Wang, Bowen
    Sun, Shao
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2014, 48 (09): : 74 - 80
  • [10] LUBRICATION MECHANISMS AT THE SURFACE OF ARTICULAR CARTILAGE
    Butcher, A. L.
    Klein, J.
    OSTEOARTHRITIS AND CARTILAGE, 2020, 28 : S186 - S186
12345