Influences Law of Mechanics Properties of 3D Printing Composite Open-hole Plates

被引：0

作者：

Yan D. ^{[1
]}

Shan Z. ^{[1
]}

Zhan L. ^{[1
]}

Fan C. ^{[1
]}

Sun Q. ^{[1
]}

机构：

[1] State Key Laboratory of Advanced Forming Technology and Equipment, China Academy of Machinery Science and Technology Group Co. Ltd., Beijing

来源：

Zhongguo Jixie Gongcheng/China Mechanical Engineering | 2020年 / 31卷 / 10期

关键词：

3D print; Composite; Mechanics property; Open-hole plate; Principal stress trajectory;

D O I：

10.3969/j.issn.1004-132X.2020.10.016

中图分类号：

学科分类号：

摘要：

In order to improve the tensile mechanics properties of 3D printing continuous carbon fiber reinforced composites, the influences of different filling paths on open-hole plates composite tensile properties were studied. The principal stress trajectory path planning method was used to print the main stress trajectory path filled open-hole plate test specimen,and the tensile properties were compared with zig-zag path filled open-hole plates and machined open-hole plates. The results show that, compared with machined open-hole plates, the tensile strength of principle stress trajectory path filled open-hole plates is 9.73% higher, and the elastic modulus is 25.58% higher. The principle stress trajectory path filled open-hole plate strain distribution before fracture is more uniform and the strain is smaller. © 2020, China Mechanical Engineering Magazine Office. All right reserved.

引用

页码：1240 / 1245

页数：5

共 16 条

[1] DU Shanyi, AdvancedComposite Materials and Aerospace Engineering, Acta Materiae Compositae Sinica, 1, pp. 1-12, (2007)
[2] FAN Zijie, GUI Liangjin, SU Ruiyi, Research and Development of Automotive Lightweight Technology, Journal of Automotive Safety and Energy, 5, 1, pp. 1-16, (2014)
[3] SHI Jun, HUANG Zhuo, Application of Composite Material in the Marine Structures, Fiber Reinforced Plastics/Composites, S1, pp. 269-273, (2012)
[4] LU Bingheng, LI Dichen, Development of the Additive Manufacturing(3D Printing) Technology, Machine Building & Automation, 42, 4, pp. 1-4, (2013)
[5] MATSUZAKI R, UEDA M, NAMIKI M, Et al., Three-dimensional Printing of Continuous-fiber Composites by In-nozzle Impregnation, Sci. Rep, 6, (2016)
[6] DICKSON A N, BARRY J N, MCDONNELL K A, Et al., Fabrication of Continuous Carbon, Glass and Kevlar Fiber Reinforced Polymer Composites Using Additive Manufacturing, Additive Manufacturing, 16, pp. 146-152, (2017)
[7] MELENKA G W, CHEUNG B K O, SCHOFIELD J S, Et al., Evaluation and Prediction of the Tensile Properties of Continuous Fiber-reinforced 3D Printed Structures, Composite Structures, 153, pp. 866-875, (2016)
[8] JUSTO J, TAVARA L, GARCIA-GUZMAN L, Et al., Characterization of 3D Printed Long Fiber Reinforced Composites, Composite Structures, 185, pp. 537-548, (2018)
[9] YAMAWAKI M, KOUNO Y., Fabrication and Mechanical Characterization of Continuous Carbon Fiber-reinforced Thermoplastic Using a Preform by Three-dimensional Printing and via Hot-press Molding, Advanced Composite Materials, 27, 2, pp. 209-219, (2018)
[10] DICKSON A N, DOWLING D P., Enhancing the Bearing Strength of Woven Carbon Fiber Thermoplastic Composites through Additive Manufacturing, Composite Structures, 212, pp. 381-388, (2019)

← 1 2 →