Morphology and Distribution of the Liquid Metal Embrittlement Crack in the Resistance Spot Welded Joint of the Galvanized Q&P980 Steel

被引：0
|
作者：
Kong L. [1 ,2 ]
Ling Z. [1 ,2 ]
Wang Z. [1 ]
Wang M. [1 ,2 ]
Pan H. [3 ]
Lei M. [3 ]
机构：
[1] Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, Shanghai
[2] Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai Jiao Tong University, Shanghai
[3] Baosteel Central Research Institute, Baosteel Group Corporation, Shanghai
来源：
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University | 2019年 / 53卷 / 06期
关键词：
Galvanized Q&P980 steel; Liquid metal embrittlement (LME); Morphology and distribution of crack; Resistance spot welding;
D O I：
10.16183/j.cnki.jsjtu.2019.06.010
中图分类号：
学科分类号：
摘要：
When some solid metals or alloys are to directly contact with specific liquid metals or alloys in tensile stress, their strength and ductility will drop and early fracture will occur, such a phenomenon is known as liquid metal embrittlement (LME). Iron can be embrittled by liquid zinc. After carrying out resistance spot welding experiment on the galvanized high strength Q&P980 steel plates, cracks were detected on the surface of joint, those cracks were found to be filled with zinc, thus it could be assumed that the cracks were caused by LME phenomenon, as zinc coating was melted and stress existed during welding process. LME cracks mainly distribute on the step and periphery of the indentation, and they showed different depth and forms. © 2019, Shanghai Jiao Tong University Press. All right reserved.
引用
收藏
页码：704 / 707
页数：3
相关论文
共 6 条
  • [1] Luo M., Defect analysis and prevention measures of spot welding of automobile, Equipment Manufacturing Technology, 3, pp. 105-108, (2016)
  • [2] Kim Y.G., Kim I.J., Kim J.S., Et al., Evaluation of surface crack in resistance spot welds of Zn-coated steel, Materials Transactions, 55, 1, pp. 171-175, (2014)
  • [3] Ashiri R., Haque M.A., Ji C.W., Et al., Supercri-tical area and critical nugget diameter for liquid metal embrittlement of Zn-coated twining induced plasticity steels, Scripta Materialia, 109, pp. 6-10, (2015)
  • [4] Ashiri R., Shamanian M., Salimijazi H.R., Et al., Liquid metal embrittlement-free welds of Zn-coated twinning in-duced plasticity steels, Scripta Materialia, 114, pp. 41-45, (2016)
  • [5] Diao K., Jiang H., Chen X., Research and typical application of QP980 steel produced by BaoSteel based on formability, Forging & Stamping Technology, 37, 6, pp. 113-115, (2012)
  • [6] Fernandes P.J.L., Jones D.R.H., Mechanisms of liquid metal induced embrittlement, International Materials Reviews, 42, 6, pp. 251-261, (1997)
1