Investigation of the spectral characteristics of a linearly chirped fiber Bragg grating with local point heating

被引：0
|
作者：
Ren L. [1 ,2 ,3 ]
Sun B. [1 ,2 ,3 ]
Ma L. [1 ,2 ,3 ]
Feng X. [1 ,2 ,3 ]
Bai J. [1 ,2 ,3 ]
机构：
[1] Institute of Photonics and Photo-Technology, Northwest University, Xi’an
[2] State Key Laboratory of Photon-Technology in Western China Energy, Xi’an
[3] Key Laboratory of Opto-Electronic Technology of Shaanxi Province, Northwest University, Xi’an
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2022年 / 51卷 / 08期
关键词：
linearly chirped fiber Bragg grating; local point heating; narrow-band transmission peaks; phase change;
D O I：
10.3788/IRLA20210708
中图分类号：
学科分类号：
摘要：
The output spectrum characteristics of a linearly chirped fiber Bragg grating (LCFBG) under localized point heating with different heating temperatures, widths and positions were investigated. The numerical simulation shows that the heating temperature and heating width applied onto the LCFBG have an obvious influence on the transmissivity and central wavelength of narrow-band transmission peaks in the transmission bandgap. The central wavelengths of the transmission peaks have a good linear relationship with the local heating positions of the LCFBG and can shift in the whole transmission bandgap region. The chirp coefficient of the LCFBG determines the wavelength tuning velocity of the transmission peaks induced by the change in the heating position. Based on the theoretical results, the spectral characteristics of the LCFBG are investigated experimentally using a commercial thermal printhead as a local heating source. The narrow-band transmission peaks are realized with high performance in terms of reproducibility, stability and potential multiwavelength tunability. The experimental results are in good agreement with those of the numerical simulation within the experimental error. © 2022 Chinese Society of Astronautics. All rights reserved.
引用
收藏
相关论文
共 13 条
  • [1] Sahota J K, Gupta N, Dhawan D., Fiber Bragg grating sensors for monitoring of physical parameters: A comprehensive review, Optical Engineering, 59, 6, (2020)
  • [2] Zhou Q, Ning T G, Wen X D, Et al., A fiber bragg grating sensor for temperature-stress simultaneous measurement, Infrared and Laser Engineering, 44, 3, pp. 1024-1027, (2015)
  • [3] Abdullina1 S R, Vlasov1 A A, Lobachl I A, Et al., Single-frequency Yb-doped fiber laser with distributed feedback based on a random FBG, Laser Physics Letters, 13, 7, (2016)
  • [4] Ghosh C, Priye V., Suppression of four-wave mixing in a 22 × 10 Gbps dense wavelength division multiplexed system by linearly chirped fiber Bragg gratings, Optical and Quantum Electronics, 51, 1, (2019)
  • [5] Felipe A, De Souza A L N., Chirp-filtering for low-complexity chromatic dispersion compensation, Journal of Lightwave Technology, 38, 11, pp. 2954-2960, (2020)
  • [6] Jiao K R, Hua S, Yang F Y, Et al., Optimizing output spectral linewidth of fiber laser utilizing phase-shifted long-period fiber grating, Optics and Laser Technology, 142, 2021, (2021)
  • [7] Agrawal G P, Radic S., Phase-shifted fiber Bragg gratings and their application for wavelength demultiplexing, IEEE Photonics Technology Letters, 6, 8, pp. 995-997, (1994)
  • [8] Du Y, Chen T, Zhang Y L, Et al., Fabrication of phase-shifted fiber Bragg grating by femtosecond laser shield method, IEEE Photonics Technology Letters, 29, 24, pp. 2143-2146, (2017)
  • [9] Lin J P, Zhang Z Y., Fabrication and characteristic of phase-shifted fiber Bragg grating, Physical Experiment of College, 27, 6, pp. 10-11, (2014)
  • [10] Cheng Q, Duan F, Huang T, Et al., Forward fiber Fourier transform spectrometer modeling and design with PZT phase modulation real-time compensation, Applied Optics, 57, 18, pp. 5025-5035, (2018)
12