Facile single step synthesis of Cu2ZnSnS4 thin films by sputtering from a single target and their electrical characterization

Facile deposition of ternary semiconducting Cu2ZnSnS4 (CZTS) thin films has been a challenge due to a very narrow range of single phase stability in the Cu-Zn-Sn-S system. While sputtering has been a very efficient method of growth of various optoelectronic thin films, the formation of secondary phases should be suppressed during sputter deposition of CZTS films. Differently with the reported studies on deposition of a precursor film followed by a delicately - controlled sulfurization process required for the formation of the kesterite CZTS phase, we demonstrate a single step synthesis route to grow phase pure CZTS thin films using a single elementary target with excess Cu by RF magnetron sputtering at a substrate temperature of 450 °C. The route did not require any post-deposition sulfurization. These films had an optical band gap of ~1.6 eV and white light sensitivity> 200% at a bias potential of 5 V, highly suitable for photovoltaic and photocatalytic activities. Detailed electro-impedance analyses from Nyquist, Bode and Mott-Schottky plots of a Mo/CZTS/Pt/electrolyte device revealed p-type conductivity with a flat band potential of 0.51 V (reversible hydrogen electrode), carrier concentration of 6.2 × 1017 cm−3 and a carrier life time as high as of ~17 μs. © 2022 Elsevier B.V.