ANALYSIS OF SHEAR CAPACITY OF GFRP-RC BEAMS BASED ON IMPROVED MODIFIED COMPRESSION FIELD THEORY

被引：0
|
作者：
Song B. [1 ]
Jin L. [1 ]
Chen F.-J. [1 ]
Du X.-L. [1 ]
机构：
[1] The Key Laboratory of Urban Security and Disaster Engineering, Ministry of Education, Beijing University of Technology, Beijing
来源：
Gongcheng Lixue/Engineering Mechanics | 2023年 / 40卷 / 08期
关键词：
improved MCFT; large-sized GFRP reinforced concrete beams; meso-scale numerical simulation; shear capacity; size effect;
D O I：
10.6052/j.issn.1000-4750.2021.12.0988
中图分类号：
学科分类号：
摘要：
Through a 3D meso-scale numerical simulation method, the shear failure mechanical analysis model for large-sized GFRP reinforced concrete (GFRP-RC) beams was established. The influences of parameters of major importance on the crack angle and on P-Δ curve of GFRP-RC beams was discussed through this model, such as shear span ratio, longitudinal reinforcement ratio, and beam depth. Based on the modified compression field theory (MCFT), a calculation model for the average crack width was established, considering the variation of crack width along the beam depth, which improves the calculation accuracy of the simplified formula for MCFT. A design method was proposed for shear bearing capacity of GFRP-RC beams without stirrups considering the influences of the shear span ratio and size effect on the crack angle and on shear capacity. The model proposed is validated by comparing with the corresponding experimental measurements of 213 GFRP-RC beams, and with the consideration of the average crack width and size effects, utilizing the model proposed will garner the satisfactory results with remarkable higher accuracy compared to current used design codes. Therefore, the improved MCFT model proposed provides a theoretical reference for the shear design of GFRP-RC beams. © 2023 Tsinghua University. All rights reserved.
引用
收藏
页码：36 / 46
页数：10
相关论文
共 59 条
  • [1] GAO D Y, ZHANG C H., Shear strength calculating model of FRP bar reinforced concrete beams without stirrups, Engineering Structures, 221, (2020)
  • [2] GE W J, ZHANG J W, CAO D F, Et al., Flexural behaviors of hybrid concrete beams reinforced with GFRP bars and steel bars [J], Construction and Building Materials, 87, pp. 28-37, (2015)
  • [3] ELGABBAS F, AHMED E A, BENMOKRANE B., Physical and mechanical characteristics of new basalt-FRP bars for reinforcing concrete structures, Construction and Building Materials, 95, 1, pp. 623-635, (2015)
  • [4] SYROKA-KOROL E, TEJCHMAN J., Experimental investigations of size effect in reinforced concrete beams failing by shear [J], Engineering Structures, 58, pp. 63-78, (2014)
  • [5] ALAM M S, HUSSEIN A., Relationship between the shear capacity and the flexural cracking load of FRP reinforced concrete beams, Construction and Building Materials, 154, pp. 819-828, (2017)
  • [6] ASHOUR A F, KARA I F., Size effect on shear strength of FRP reinforced concrete beams, Composites Part B:Engineering, 60, pp. 612-620, (2014)
  • [7] JUMAA G, YOUSIF A R., Size effect on the shear failure of high-strength concrete beams reinforced with basalt FRP bars and stirrups [J], Construction and Building Materials, 209, pp. 77-94, (2019)
  • [8] VECCHIO F J, COLLINS M P., The modified compression-field theory for reinforced concrete elements subjected to shear, ACI Journal, 83, 2, pp. 219-231, (1986)
  • [9] VECCHIO F J, COLLINS M P., Predicting the response of reinforced concrete beams subjected to shear using the modified compression field theory, ACI Structural Journal, 85, 3, pp. 258-268, (1988)
  • [10] BENTZ E C, COLLINS M P., Development of the 2004 Canadian Standards Association (CSA) A23.3 shear provisions for reinforced concrete, Canadian Journal of Civil Engineering, 33, 5, pp. 521-534, (2006)
123456