Effect of corrosion on boiling heat transfer characteristics of metal specimens with micro-structure surface

被引：0
|
作者：
Ouyang K. [1 ]
Xu W. [1 ]
Liu X. [1 ]
He X. [2 ]
机构：
[1] School of Nuclear Science and Engineering, Shanghai Jiao Tong University, Shanghai
[2] Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China, Chengdu
来源：
He Jishu/Nuclear Techniques | 2023年 / 46卷 / 06期
基金：
中国国家自然科学基金;
关键词：
Boiling heat exchange; Corrosion; Micro-structure; Surface modification; Visualization;
D O I：
10.11889/j.0253-3219.2023.hjs.46.060606
中图分类号：
学科分类号：
摘要：
[Background] Many existing studies have shown that the use of suitable surface modification methods can enhance the boiling heat transfer effect of metal components, making it have a broad potential application prospect in the pressurized water reactor. However, for the weak alkaline environment of high temperature and high pressure in the reactor, little literature is reported on whether this enhanced effect can be maintained for a long time. [Purpose] This study aims to explore the effect of corrosion on boiling heat transfer characteristics of metal specimens with micro-structure surface. [Methods] First of all, three micro-structures of micro-groove, micro-porous and micro-columns were processed on the surface of stainless steel plate specimens by laser processing. Then the specimens were placed in the high-temperature and high-pressure environment simulating the actual reactor conditions to carry out corrosion experiments for up to 200 d. Finally, the pool boiling experiment and visualization study of the specimens before and after corrosion were carried out for comparison. [Results] The results show that the surface critical heat flux (CHF) of the three micro-structured metal specimens increases and then decreases with the increase of corrosion time, among which the micro-pores specimens have the largest bubble generation rate at the beginning of nuclear boiling, and the micro-groove specimens have the highest CHF. [Conclusions] The influence law and mechanism of long-term corrosion in pressurized water reactor on the enhanced heat transfer effect of different micro-structure surfaces are partially revealed by this study. © 2023 Science Press. All rights reserved.
引用
收藏
相关论文
共 14 条
  • [1] Young Lee C, Hossain Bhuiya M M, Kim K J., Pool boiling heat transfer with nano-porous surface[J], International Journal of Heat and Mass Transfer, 53, 19 – 20, pp. 4274-4279, (2010)
  • [2] Hu H, Xu C, Zhao Y, Et al., Boiling and quenching heat transfer advancement by nanoscale surface modification, Scientific Reports, 7, (2017)
  • [3] Saeidi D, Alemrajabi A A., Experimental investigation of pool boiling heat transfer and critical heat flux of nanostructured surfaces[J], International Journal of Heat and Mass Transfer, 60, pp. 440-449, (2013)
  • [4] MacNamara R J, Lupton T L, Lupoi R, Et al., Enhanced nucleate pool boiling on copper-diamond textured surfaces, Applied Thermal Engineering, 162, (2019)
  • [5] Liu B, Liu J, Zhang Y H, Et al., Experimental and theoretical study of pool boiling heat transfer and its CHF mechanism on femtosecond laser processed surfaces[J], International Journal of Heat and Mass Transfer, 132, pp. 259-270, (2019)
  • [6] Long J Y, Liu Z Y, Lin H P, Et al., Pool boiling heat transfer and bubble dynamics over V-shaped microchannels and micropyramids: does high aspect ratio always benefit boiling?, Applied Thermal Engineering, 201, (2022)
  • [7] Cao Z, Ouyang Z Q, Liu Z Y, Et al., Effects of surface oxides and nanostructures on the spontaneous wettability transition of laser-textured copper surfaces, Applied Surface Science, 560, (2021)
  • [8] Ferjancic K, Moze M, Krizan P, Et al., Subcooled critical heat flux on laser-textured stainless-steel ribbon heaters in pool boiling of FC-72, International Journal of Heat and Mass Transfer, 159, (2020)
  • [9] Rohsenow W M., A method of correlating heat-transfer data for surface boiling of liquids, Journal of Fluids Engineering, 74, 6, pp. 969-975, (1952)
  • [10] Raza M Q, Kumar N, Raj R., Wettability-independent critical heat flux during boiling crisis in foaming solutions [J], International Journal of Heat and Mass Transfer, 126, pp. 567-579, (2018)
12