Influence of Main Steam Temperature and Pressure Fluctuations on the Creep-Fatigue Damage of a Steam Turbine Rotor

被引:0
|
作者
Zhao N. [1 ]
Wang W. [1 ]
Liu Y. [1 ]
机构
[1] Key Laboratory for Power Machinery and Engineering of Ministry of Education, Gas Turbine Research Institute, Shanghai Jiao Tong University, Shanghai
关键词
Creep-fatigue damage; Fluctuations; High-pressure rotor; Pressure; Steam turbine; Temperature;
D O I
10.16183/j.cnki.jsjtu.2019.02.001
中图分类号
学科分类号
摘要
The finite element software Abaqus is adopted to construct an axisymmetric finite element model of a high-pressure rotor of a 1 000 MW ultra-super critical steam turbine. The boundary conditions are determined based on the in-service steam temperature and pressure data from the power plant. After finite element calculation, the rotor mechanical behavior in the steady operation is analyzed, and the Lemaitre continuum damage model is further applied to study the creep-fatigue damage of the rotor. In addition, the calculating results without consideration of the steam temperature and pressure fluctuations are used for comparison. The results show that the fluctuations of the steam temperature and pressure exert a great influence on the thermo-mechanical behavior of the rotor; the temperature and stress of the rotor keep changing with the steam temperature and pressure; the creep-fatigue damage in the inlet area under the in-service conditions is more than double that under constant steam temperature and pressure conditions. © 2019, Shanghai Jiao Tong University Press. All right reserved.
引用
收藏
页码:127 / 133
页数:6
相关论文
共 20 条
  • [1] Chen P., Optimization in startup and shutdown process of large turbine and research on life, (2009)
  • [2] Ding Y., Optimization of start-up process in steam turbine, (2013)
  • [3] Sun Y., On assessment of low cycle fatigue damage of large steam turbine rotor, (2014)
  • [4] Zhang M., The thermal stress analysis of reactionary steam turbine rotor and design of life management software, (2015)
  • [5] Jing J., Meng G., Nonlinear damage mechanics analysis of steam turbine rotor creep-fatigue damage, Proceedings of the CSEE, 23, 9, pp. 167-172, (2003)
  • [6] Wang K., Huang S., Huang P., Et al., A rotor service-life evaluation system for large-sized steam turbines based on finite element technology, Journal of Engineering for Thermal Energy and Power, 22, 3, pp. 241-244, (2007)
  • [7] Wu W., Strength study on super-ultra critical steam-turbine rotor under high temperature, (2009)
  • [8] Han W., Low-cycle fatigue and high-temperature creep lifetime investigation of a 1000 MW steam turbine rotor, (2013)
  • [9] Kebadze B.V., Sroelov V.S., Kul'pin B.V., Et al., Statistical characteristics of the temperature fluctuations in a direct-flow sodium-Water steam generator, Atomic Energy, 39, 4, pp. 870-873, (1975)
  • [10] Samal M.K., Dutta B.K., Guin S., Et al., A finite element program for on-line life assessment of critical plant components, Engineering Failure Analysis, 16, 1, pp. 85-111, (2009)