Preparation and performance of fabric decorative wood plastic composites

被引：0
|
作者：
Zhou X. [1 ]
Hao S. [1 ]
Shan W. [1 ]
Wang W. [1 ]
Fang Y. [1 ]
Liu T. [1 ]
机构：
[1] Key Lab of Bio-based Material Science & Technology of Education Ministry, Northeast Forestry University, Harbin
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2024年 / 41卷 / 04期
关键词：
fabrics; mechanical properties; surface decoration; thermoplastic polymers; wood-plastic composites;
D O I：
10.13801/j.cnki.fhclxb.20230902.002
中图分类号：
学科分类号：
摘要：
The use of fabrics to decorate wood plastic composites (WPC) in a variety of styles can greatly improve the practical value of WPC. In this study, a new decorative fabric veneer technique was developed, in which a thermoplastic polymer was laid on the surface of the decorative fabric. This enabled the thermoplastic polymer to be in direct contact with the hot platen, thus shortening the time that the decorative fabric was exposed to high temperatures. Moreover, the heat-melted polymer fused with the polymer on the surface of the wood-plastic substrate through the decorative fabric, which served to fix and protect the decorative fabric. In this paper, the effects of hot-pressing temperature (140℃, 160℃ and 180℃), wood-plastic ratio in the substrate (6∶4, 7∶3 and 8∶2) and the type of polymer (high density polyethylene, low density polyethylene and polylactic acid (PLA)) on the properties, such as surface bonding strength, decorative effect and mechanical properties of the decorative wood flour/high-density polyethylene (WF/HDPE) composites, were investigated. The changes in the properties of WF/HDPE composites and fabrics were analyzed and characterized by FTIR and SEM. The results show that the molten polymer is able to pass through the fiber voids of the decorative fabric and fuses well with the wood-plastic substrate. The surface of the produced decorative composite material is smooth and even. The effects of hot pressing temperature, substrate wood-plastic ratio and surface polymer type were comprehensive analyzed. When the hot pressing temperature is 160℃, wood-plastic ratio is 7∶3, the mechanical strength of the WF/HDPE composite substrate with the surface layer of the fabric decorated with PLA is the best. Its surface bonding strength is up to 3.64 MPa and the bending strength reaches 82.19 MPa. © 2024 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：1809 / 1819
页数：10
相关论文
共 30 条
  • [1] WANG Haigang, ZHANG Jingfa, WANG Weihong, Et al., Research of fiber reinforced wood-plastic composites: A review, Scientia Silvae Sinicae, 52, 6, pp. 130-139, (2016)
  • [2] ZHAO L, XI F, WANG G., Calculation model for uniaxial stress-strain relationship of wood plastic composites[J], Polymer Composites, 42, 12, pp. 6664-6671, (2021)
  • [3] HAO Jianxiu, WANG Haigang, WANG Weihong, Et al., Improve toughness wood flour/HDPE composites with elastomers, Acta Materiae Compositae Sinica, 33, 5, pp. 976-983, (2016)
  • [4] CAO Yan, XU Hailong, HAO Jianxiu, Et al., Infiuence of ratio of hybrid wood flour on physical and mechanical properties of wood-plastic composites[J], Journal of Forestry and Environment, 38, 3, pp. 284-289, (2018)
  • [5] WANG H, ZHANG X, GUO S, Et al., A review of coextruded wood-plastic composites[J], Polymer Composites, 42, 9, pp. 4174-4186, (2021)
  • [6] CHEN Juan, MIAO Qingqing, WANG Jianrong, Et al., Research progress of natural plant fiber wood-plastic composites, Journal of University of Jinan (Science and Technology), 34, 1, pp. 47-51, (2020)
  • [7] WANG Dongzhi, ZHU Mang, LIU Meixia, Et al., Research progress of biomass wood-plastic composites, Science and Technology & Innovation, 22, pp. 29-30, (2019)
  • [8] YANG Shoulu, HUANG Anxiang, ZHANG Lei, Et al., Application of wood-plastic composites in green buildings, Engineering Plastics Application, 46, 1, pp. 123-127, (2018)
  • [9] LYU Yixin, ZHOU Chengmin, LI Zhenyu, A review on China's development of new furniture materials[J], Furniture & Interior Design, 7, pp. 20-22, (2020)
  • [10] CAO Yan, WANG Weihong, WANG Haigang, Et al., Effect of preparation method on the flexural properties of WPC, Acta Materiae Compositae Sinica, 30, S1, pp. 311-314, (2013)
123