Corrosive Wear Properties of Boron-doped Diamond-like Carbon Films in Seawater Environment

被引：0
|
作者：
Liu J. [1 ]
Cao L. [1 ]
Wan Y. [1 ]
Shang L.-L. [2 ]
Pu J.-B. [3 ]
机构：
[1] School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao
[2] State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou
[3] Key Laboratory of Marine Materials and Related Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo
来源：
Surface Technology | 2019年 / 48卷 / 08期
基金：
中国国家自然科学基金;
关键词：
artificial seawater; boron-doped DLC; EIS; OCP; tribological performance;
D O I：
10.16490/j.cnki.issn.1001-3660.2019.08.033
中图分类号：
学科分类号：
摘要：
The work aims to investigate the effect of boron dopant on the corrosion resistance and friction and wear properties of diamond-like carbon (DLC) films in artificial seawater. An undoped DLC film and two boron-doped DLC films with the content of B element of 7.23% and 13.27% were deposited on the surface of 304 stainless steel substrate by unbalanced magnetron sputtering through controlling current of boron carbide and graphite targets. Scanning electron microscopy, Raman spectroscopy, nanoindentation tester, scratch tester and ball-on-disk tribometer were used to test the chemical composition, microstructure, nanohardness, adhesion and friction properties of films, respectively. The friction and corrosion resistance of films in artificial seawater medium was studied by testing the static polarization and electrochemical impedance spectroscopy and measuring the changes in open circuit potential of films before, during and after sliding process. Compared to undoped DLC film, there was less change in hardness and elastic modulus of boron-doped DLC film with B content of 7.23%. However, ID/IG ratio of doped DLC film increased, adhesion with substrate increased from 20 N to 36 N, corrosion potential increased, corrosion current density decreased, polarization resistance increased and tribocorrosion properties in the artificial seawater medium deceased by 10.7%, wear reduced by 37.0% and potential of open circuit increased dramatically. The tribocorrosion properties and corrosion resistance of DLC film with doped boron content of 13.27% decreased significantly. Doping appropriate amount of B into DLC film is helpful to improve the corrosion resistance and abrasion resistance of DLC film in artificial seawater medium. © 2019, Chongqing Wujiu Periodicals Press. All rights reserved.
引用
收藏
页码：247 / 256
页数：9
相关论文
共 40 条
  • [1] TOTTEN G E, WEDEVEN L D, ANDERSON M, Et al., Bench testing of industrial fluid lubrication and wear properties used in machinery applications, (2001)
  • [2] LEI S, ZHANG Y, WANG Y, Et al., Corrosion and wear behaviors of PVD CrN and CrSiN coatings in seawater, Transactions of nonferrous metals society of China, 26, 1, pp. 175-184, (2016)
  • [3] CHEN Qing-yun, SHI Kai-min, SU Min-hua, Et al., Progress of diamond-like carbon films, Journal of materials engineering, 45, 3, pp. 119-128, (2017)
  • [4] XUE Qun-ji, WANG Li-ping, Diamond-like carbon-based film material, (2012)
  • [5] CHEN Mei-rong, ZENG Xian-guang, SUN De-en, Et al., Effects of tribological properties and corrosion resistance of Zr-doped DLC films, Surface technology, 46, 6, pp. 138-142, (2017)
  • [6] PAPAKONSTANTINOU P, ZHAO J F, LEMOINE P, Et al., The effects of Si incorporation on the electrochemical and nanomechanical properties of DLC thin films, Diamond and related materials, 11, 3-6, pp. 1074-1080, (2002)
  • [7] LIU C, HU D, XU J, Et al., In vitro electrochemical corrosion behavior of functionally graded diamond-like carbon coatings on biomedical nitinol alloy, Thin solid films, 496, 2, pp. 457-462, (2006)
  • [8] NEKKANTY S, WALTER M E., Indentation damage to boron carbide-DLC coatings with different compositions, Surface and coatings technology, 183, 1, pp. 1-9, (2004)
  • [9] ECKARDT T, BEWILOGUA K, VANDERKOLK G, Et al., Improving tribological properties of sputtered boron carbide coatings by process modifications, Surface and coatings technology, 126, 1, pp. 69-75, (2000)
  • [10] KLEINSORGE B, ILIE A, CHHOWALLA M, Et al., Electrical and optical properties of boronated tetrahedrally bonded amorphous carbon(ta-C:B), Diamond and related materials, 7, 2-5, pp. 472-476, (1998)
1234