Vibration measurement on compressor rotor blades of aero-engine based on tip-timing

被引：0

作者：

Liu M. ^{[1
,2
]}

Zhu J. ^{[1
]}

Liang E. ^{[1
]}

Teng G. ^{[1
]}

Xiao X. ^{[1
]}

Qiao B. ^{[2
]}

机构：

[1] Sichuan Gas Turbine Establishment, Aero Engine Corporation of China, Chengdu

[2] School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an

来源：

Hangkong Dongli Xuebao/Journal of Aerospace Power | 2019年 / 34卷 / 09期

关键词：

Amplitude; Compressor rotor blade; Frequency; Tip-timing; Vibration testing;

D O I：

10.13224/j.cnki.jasp.2019.09.006

中图分类号：

学科分类号：

摘要：

The theory and data processing method of the non-contact vibration testing system based on blade tip timing were introduced. The system was successfully applied in the blade vibration measurement on the first stage of rotor blades of a turbo-fan engine high pressure compressor, and the blade tip amplitudes and frequencies of the whole blades at resonance were obtained. The displacement-stress conversion ratio from blade tip magnitude to the critical points stress was calculated by the finite element analysis. The vibration character of the whole blades was obtained through the non-contact vibration testing system of the turbo-fan engine. As the thickness of prototypical blades was enlarged by the processing technology, the blades were resonated in the working speed caused by the engine order of 3, which led to the failure of the blades. The vibration character of remodelled blades is very well after promotion of processing technology. © 2019, Editorial Department of Journal of Aerospace Power. All right reserved.

引用

页码：1895 / 1904

页数：9

共 18 条

[1] Ostachowiez W.M., Krawezuk M., Analysis of the effect of cracks on the natural frequencies of a cantilever beam, Journal of Sound and Vibration, 150, 2, pp. 191-201, (1991)
[2] Wauer J., Vibration of cracked rotating blades, (1992)
[3] Jia X., Hu X., Song Y., Serviceable limits of a crack type foreign object damaged blade considering high cycle fatige, Journal of Aerospace Power, 34, 2, pp. 292-304, (2019)
[4] Peng J., Liu B., Application research on vibration frequency and stress instrumentation of compressor rotor blades, Gas Turbine Experiment and Research, 16, 1, pp. 10-13, (2003)
[5] Wang F., Zhu J., Xu G., Test method for the combined high and low cycle fatigues of turbine blade based on the whole engine operation, Journal of Aerospace Power, 33, 10, pp. 2343-2350, (2018)
[6] Fang Z., The research of non-contact measurement technique of rotating blade vibration
[7] Zielinski M., Ziller G., Noncontact crack detection on compressor rotor blades to prevent further damage after HCF-failure, (2005)
[8] Guru S.S., Shylaja S., Kumar S., Et al., Pre-emptive rotor blade damage identification by blade tip timing method, Journal of Engineering for Gas Turbines and Power, 136, 7, (2013)
[9] Qu W., Wang W., Chen L., The influence of crack parameters on the vibration characteristics of steam turbine blades, Journal of Beijing University of Chemical Technology (Natural Science), 43, 1, pp. 78-85, (2016)
[10] Chen Z., Yang Y., Xie Y., Et al., Non-contact crack detection of high-speed blades based on principal component analysis and Euclidian angles using optical-fiber sensors, Sensors and Actuators: A Physical, 201, 1, pp. 66-72, (2013)

← 1 2 →