Influence of rare earths, Ga element and their synergistic effects on the microstructure and properties of lead-free solders

被引：0
|
作者：
Xue P. [1 ]
He P. [2 ]
Long W. [3 ]
Song M. [4 ]
机构：
[1] Nanjing University of Science and Technology, Nanjing
[2] State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin
[3] State Key Laboratory of Advanced Brazing Filler Metals and Technology, China Innovation Academy of Intelligent Equipment Co., Ltd, Ningbo
[4] Dalian Shipbuilding Industry Equipment Manufacturing Co. LTD, Dalian
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2021年 / 42卷 / 04期
关键词：
Ga element; Microstructure; Property; Rare earths; Synergistic effect;
D O I：
10.12073/j.hjxb.20200817001
中图分类号：
学科分类号：
摘要：
Rare earth (RE) elements and low melting-point Ga elements are often added as alloying elements to lead-free solders to improve the overall performance and reliability of the solder. When RE and Ga elements are added in combination, their synergistic effects can further improve the microstructure and properties of the solder. In particular, Ga element can effectively inhibit the growth of Sn whiskers in lead-free solders containing RE Nd. Therefore, this article reviewed the effects of RE, low melting-point Ga element and their synergistic effects on the microstructure, wettability, melting characteristics, mechanical properties and reliability of lead-free solders. What's more, the mechanism of Sn whiskers formation in lead-free solders bearing RE and the factors affecting the growth of Sn whiskers were introduced. Finally, the deficiencies in the research of lead-free solder containing RE and Ga elements were summarized, and the future research direction was looked-ahead. © 2021, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.
引用
收藏
页码：1 / 19
页数：18
相关论文
共 125 条
  • [1] Annuar S, Mahmoodian R, Hamdi M, Et al., Intermetallic compounds in 3D integrated circuits technology: a brief review, Science & Technology of Advanced Materials, 18, 1, pp. 693-703, (2017)
  • [2] Xue Songbai, Wang Bo, Zhang Liang, Et al., Development of green welding technology in China during the past decade, Materials Reports, 33, 9, pp. 2813-2830, (2019)
  • [3] Tu K N, Liu Y X., Recent advances on kinetic analysis of solder joint reactions in 3D IC packaging technology, Materials Science and Engineering: R: Reports, 136, pp. 1-12, (2019)
  • [4] Zhang L, Tu K N., Structure and properties of lead-free solders bearing micro and nano particles, Materials Science and Engineering: R: Reports, 82, pp. 1-32, (2014)
  • [5] Wang Shang, Tian Yanhong, The state of art on the micro-joining and nano-joining technologies, Materials Science & Technology, 25, 5, pp. 1-5, (2017)
  • [6] Zhang P, Xue S B, Wang J H., New challenges of miniaturization of electronic devices: Electromigration and thermomigration in lead-free solder joints, Materials & Design, 192, (2020)
  • [7] Wang J H, Xue S B, Zhang P, Et al., The reliability of lead-free solder joint subjected to special environment: a review, Journal of Materials Science: Materials in Electronics, 30, 10, pp. 9065-9086, (2019)
  • [8] Zhao M, Zhang L, Liu Z, Et al., Structure and properties of Sn-Cu lead-free solders in electronics packaging, Science and Technology of Advanced Materials, 20, 1, pp. 421-444, (2019)
  • [9] Xu Kaikai, Zhang Liang, Sun Lei, Et al., Reserach progress on Sn-Zn solder, Materials for Mechanical Engineering, 44, 6, pp. 1-5, (2020)
  • [10] Ren G, Wilding I J, Collins M N., Alloying influences on low melt temperature SnZn and SnBi solder alloys for electronic interconnections, Journal of Alloys and Compounds, 665, pp. 251-260, (2016)
12345678910