Parameter Optimization and Experiment of Picking Device of Self-propelled Potato Collecting Machine

被引：0
|
作者：
Wang X. [1 ,2 ]
Yang D. [1 ,2 ]
Liu M. [1 ,2 ]
Li Y. [1 ,2 ]
Chen X. [1 ,2 ]
Cheng Z. [1 ,2 ]
机构：
[1] Chinese Academy of Agricultural Mechanization Sciences Group Co., Ltd., Beijing
[2] National Key Laboratory of Agricultural Equipment Technology, Beijing
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2023年 / 54卷
关键词：
EDEM-RecurDyn joint simulation; parameter optimization; picking device; potato collecting machine;
D O I：
10.6041/j.issn.1000-1298.2023.S2.003
中图分类号：
学科分类号：
摘要：
In order to solve the problems of high labor intensity, low efficiency, and high cost of manual picking after segmented harvesting of potatoes, a self-propelled potato picking device was designed. The picking device with a double layer reverse chain clamping and conveying function was designed to address the issue of soil accumulation in the feeding part of the picking device, which caused poor potato conveying and affected the overall operation efficiency. To determine the optimal operating parameters of the picking device, a Box — Benhnken test method was used based on the coupling simulation of discrete element software EDEM and multi body dynamics software RecurDyn. The potato flow rate and potato damage rate were used as experimental indicators, and the forward speed of the picking device, the depth of the picking shovel into the soil, the conveying chain speed of the picking device, and the reverse clamping chain speed were used as experimental factors. A four factor and three level experimental was conducted on the working parameters of the device, Design-Expert software was used to establish a quadratic polynomial regression model. After optimizing the regression model, a response surface curve was drawn to determine the optimal operating parameters of the device. Field experiments showed that when the forward speed of the picking device was 0. 70 m/s, the depth of the picking shovel into the soil was 120 mm, the conveying chain speed of the picking device was 1. 20 m/s, and the reverse chain speed was 1. 20 m/s, the potato flow rate was 5. 94 kg/s, and the potato damage rate was 2. 10%. Compared with the simulated theoretical values, the errors were 3.30% and 4.48%, respectively. The research result can provide reference for the design of potato picking devices. © 2023 Chinese Society of Agricultural Machinery. All rights reserved.
引用
收藏
页码：20 / 29
页数：9
相关论文
共 27 条
  • [1] YANG Ranbing, TIAN Guangbo, SHANG Shuqi, Et al., Design and experiment of roller group type potato soil separator for potato harverster[J], Transactions of the Chinese Society for Agricultural Machinery, 54, 2, pp. 107-118, (2023)
  • [2] LU Jinqing, YANCt Xiaohan, LU Yining, Et al., Analysis and experiment of potato damage in process of lifting and separating potato excavator, Transactions of the Chinese Society for Agricultural Machinery, 51, 1, pp. 103-113, (2020)
  • [3] YANG Xiaoping, WEI Hongan, ZHAO Wuyun, Et al., Design and experiment of 4U — 1600 set of pile type potato digger [J], Transactions of the Chinese Society for Agricultural Machinery, 51, 6, pp. 83-92, (2020)
  • [4] LU Jinqing, TIAN Zhongen, YANG Ying, Et al., Design and experimental analysis of4U2A type double-row potato digger, Transactions of the CSAE, 31, 6, pp. 17-24, (2015)
  • [5] WEI Zhongcai, LI Hongwen, SUN Chuanzhu, Et al., Improvement of potato harvester with two segment of vibration and wave separation, Transactions of the CSAE, 34, 12, pp. 42-52, (2018)
  • [6] WEI Zhongcai, LI Hongwen, SU Guoliang, Et al., Design and experiment of potato harvester using double cushions for low laying separation technology, Transactions of the Chinese Society for Agricultural Machinery, 50, 9, pp. 140-152, (2019)
  • [7] WANG Jiasheng, SHANG Shuqi, Development and experiment of double-row self-propelled carrots combine[J], Transactions of the CSAE, 28, 12, pp. 38-43, (2012)
  • [8] GU Fengwei, HU Zhichao, WU Huichang, Et al., Development and experiment of 4LT — A staggered-dig sugar beer combine rjl, Transactions of the CSAE, 30, 23, pp. 1-9, (2014)
  • [9] WEI Zhongcai, LI Hongwen, SUN Chuanzhu, Et al., Design and experiment of potato combined harvester based on multi-stage separation technology [J], Transactions of the Chinese Society for Agricultural Machinery, 50, 1, pp. 129-140, (2019)
  • [10] LI Tao, ZHOU Jin, XU Wenyi, Et al., Development of 4UGS2 type double-row sweet potato harvester, Transactions of the CSAE, 34, 11, pp. 26-33, (2018)
123