Adsorption equilibrium of hydrogen on carbon-material incorporated MIL-101(Cr) composites

被引：0
|
作者：
Liao S.-P. [1 ]
Zheng Q.-R. [1 ,2 ]
Wu M.-B. [1 ]
Zhang X. [1 ]
机构：
[1] Institute of Marine Engineering, Jimei University, Xiamen
[2] Provincial Key Laboratory of Naval Architecture & Ocean Engineering, Xiamen
来源：
Gao Xiao Hua Xue Gong Cheng Xue Bao/Journal of Chemical Engineering of Chinese Universities | 2023年 / 37卷 / 02期
关键词：
activated carbon; graphene; hydrogen adsorption; incorporation; MIL-101(Cr);
D O I：
10.3969/j.issn.1003-9015.2022.00.009
中图分类号：
学科分类号：
摘要：
Two typical carbon based materials were employed to incorporate with metal organic frameworks (MOFs) for enhancing hydrogen adsorption performance. 1% activated carbon and graphene sheets were added within the solution for solvo-thermally synthesizing MIL-101(Cr) composites. Adsorption models and isosteric heat of hydrogen adsorption were studied through structural characterization, micromorphology observation and adsorption equilibrium of hydrogen. The results show that there are 41.1% and 17.4% increment of the maximum hydrogen adsorption capacity on sample (AM-01) incorporated with activated carbon AX-21 and GM-02 with graphene oxide (GO), respectively, when comparing those on MIL-101(Cr) under 77.15 -87.15 K and 0-6 MPa. The Toth equation had the highest accuracy when comparing with Langmuir equation and Langmuir-Freundlich equation. The mean relative errors between the experimental data on AM-01 and GM-02, and those predicted by Toth equation were 0.55% and 0.41% at 77.15 K, respectively. The isosteric heat of hydrogen adsorption on AM-01 and GM-02 were 2.96-8.64 kJ∙mol-1 and 3.06-8.57 kJ∙mol-1, respectively. These results indicate that adsorption capacity of hydrogen can be increased via incorporation GO or activated carbon with larger specific surface areas, and Toth equation is suitable for analyzing adsorption equilibrium. © 2023 Zhejiang University. All rights reserved.
引用
收藏
页码：224 / 232
页数：8
相关论文
共 30 条
  • [1] LATROCHE M, SUZY S, SERRE C, Et al., Hydrogen storage in the giant-pore metal-organic frameworks MIL-100 and MIL-101, Angewandte Chemie-International Edition, 45, 48, pp. 8227-8231, (2006)
  • [2] CHANCHETTI L F, LEIVA D R, LOPES DE FARIA L I, Et al., A scientometric review of research in hydrogen storage materials, International Journal of Hydrogen Energy, 45, 8, pp. 5356-5366, (2020)
  • [3] KONG Q Q, LU J M, ZHANG J, Et al., Preparation and adsorption properties of bimetallic organic framework materials, Journal of Chemical Engineering of Chinese Universities, 35, 2, pp. 348-352, (2021)
  • [4] MURRAY L J, DINCA M, LONG J R., Hydrogen storage in metal-organic frameworks, Chemical Society Reviews, 38, pp. 1294-1314, (2009)
  • [5] WANG K K, WANG Q M, WANG X, Et al., Intramolecular hydrogen bond-induced high chemical stability of metal-organic frameworks, Inorganic Chemistry Frontiers, 7, 19, pp. 3548-3554, (2020)
  • [6] LIU H Y, GAO G M, BAO F L, Et al., Enhanced water stability and selective carbon dioxide adsorption of a soc-MOF with amide-functionalized linkers, Polyhedron, 160, pp. 207-212, (2019)
  • [7] CHOI H J, DINCA M, DAILLY A, Et al., Hydrogen storage in water-stable metal-organic frameworks incorporating 1,3-and 1,4-benzenedipyrazolate, Energy & Environmental Science, 3, 1, pp. 117-123, (2010)
  • [8] ROWSELL J L C, YAGHI O M., Strategies for hydrogen storage in metal-organic frameworks, Angewandte Chemie-International Edition, 44, 30, pp. 4670-4679, (2005)
  • [9] ICHIKAWA T, CHEN D M, ISOBE S, Et al., Hydrogen storage properties on mechanically milled graphite, Materials Science & Engineering, B: Advanced Functional Solid-State Materials, 108, 1, pp. 138-142, (2003)
  • [10] LIU D, GU W Y, ZHOU L, Et al., Recent advances in MOF-derived carbon-based nanomaterials for environmental applications in adsorption and catalytic degradation, Chemical Engineering Journal, 427, (2022)
123