Identification of Position-independent Geometric Errors for Rotary Axes of Five-axis Table-tilting Machine Tools

被引：0
|
作者：
Liang X. [1 ,2 ,3 ]
Lu Y. [1 ,2 ,3 ]
Wang C. [1 ,2 ,3 ]
机构：
[1] School of Electromechanical Engineering, Guangdong University of Technology, Guangzhou
[2] Guangdong Provincial Key Laboratory of Minimally Invasive Surgical Instruments and Manufacturing Technology, Guangdong University of Technology, Guangzhou
[3] State Key Laboratory for High Performance Tools, Guangzhou
来源：
Zhongguo Jixie Gongcheng/China Mechanical Engineering | 2023年 / 34卷 / 21期
关键词：
double ball bar; five-axis machine tool; identification method of rotary axes; position-independent geometric error(PIGE);
D O I：
10.3969/j.issn.1004-132X.2023.21.007
中图分类号：
学科分类号：
摘要：
PIGEs of rotary axes were the important factors that affected the machining accuracy of five-axis machine tools. Taking AC type five-axis table-tilting machine tools as an example, an identification method of PIGEs of rotary axes was proposed based on the differential evolution algorithm. Firstly, a mathematical model of PIGEs and length change of ball bar was established. The initial PIGEs may be identified by existing methods. Then, an optimization objective function was defined, and the PIGEs of the rotary axes were optimized as a whole by a differential evolution algorithm to improve the identification accuracy of the rotary axes PIGEs. The experimental and simulation results show that the proposed method may effectively improve the identification accuracy of the PIGEs of the rotary axes. © 2023 China Mechanical Engineering Magazine Office. All rights reserved.
引用
下载
收藏
页码：2585 / 2591
页数：6
相关论文
共 15 条
  • [1] YANG S H, LEE K I., Identification of 11 Position-independent Geometric Errors of a Five-axis Machine Tool Using 3D Geometric Sensitivity Analysis [J], The International Journal of Advanced Manufacturing Technology, 113, pp. 3271-3282, (2021)
  • [2] LASEMI A, XUE Deyi, GU Peihua, Accurate Identification and Compensation of Geometric Errors of 5-axis CNC Machine Tools Using Double Ball Bar[J], Measurement Science and Technology, 27, 5, (2016)
  • [3] DING Shuang, HUANG Xiaodiao, YU Chunjian, Novel Method for Position-independent Geometric Error Compensation of Five-axis Orthogonal Machine Tool Based on Error Motion[J], The International Journal of Advanced Manufacturing Technology, 83, 5, pp. 1069-1078, (2016)
  • [4] XIANG Sitong, YANG Jianguo, ZHANG Yi, Using a Double Ball Bar to Identify Position-independent Geometric Errors on the Rotary Axes of Five-axis Machine Tools[J], The International Journal of Advanced Manufacturing Technology, 70, 9, pp. 2071-2082, (2014)
  • [5] IBARAKI S, IRITANI T, MATSUSHITA T., Calibration of Location Errors of Rotary Axes on Five-axis Machine Tools by On-the-machine Measurement Using a Touch-trigger Probe, International Journal of Machine Tools and Manufacture, 58, pp. 44-53, (2012)
  • [6] HOU Hongtian, Identification and Compensation of Geometric Errors in a Five-axis CNC Machine with Double Rotary Table, (2021)
  • [7] GUO Shijie, JIANG Gedong, MEI Xuesong, Et al., Measurement and Identification of Geometric Errors for Turntable-tilting Head Type Five-axis Machine Tools[J], Optics and Precision Engineering, 26, 11, pp. 2684-2694, (2018)
  • [8] ZHANG Tongtong, Five-axis Machine Tool Rotation Axis Geometric Error Measurement and Identification Research, (2022)
  • [9] XIANG Sitong, ALTINTAS Y., Modeling and Compensation of Volumetric Errors for Five-axis Machine Tools[J], International Journal of Machine Tools and Manufacture, 101, pp. 65-78, (2016)
  • [10] WANG Hao, JIANG Xiaogeng, Geometric Error Identification of Five-axis Machine Tools Using Dual Quaternion[J], International Journal of Mechanical Sciences, 229, (2022)
12