Research on Constraint Degree of SE(T) Specimen Based on Crack Tip Plastic Zone Parameters

[1] Souza R, Ruggieri C, Zhang Z., A framework for fracture assessments of dissimilar girth welds in offshore pipelines under bending[J], Engineering Fracture Mechanics, 163, pp. 66-88, (2016)

[2] Pisarski H., Assessment of flaws in pipeline girth welds—a critical review[J], Welding in the World, 57, 6, pp. 933-945, (2013)

[3] Guide to methods for assessing the acceptability of flaws in metallic structures, (2005)

[4] Veritas D N., Fracture control for pipeline installation methods introducing cyclic plastic strain, (2006)

[5] Chao Y, Yang S, Sutton M., On the fracture of solids characterized by one or two parameters: theory and practice[J], Journal of the Mechanics and Physics of Solids, 42, 4, pp. 629-647, (1994)

[6] Zhu X-K, Leis B N., Bending modified J–Q theory and crack-tip constraint quantification[J], International Journal of Fracture, 141, 1, pp. 115-134, (2006)

[7] Xia Congcong, Research on the influence of crack tip constraint on the crack growth resistance curve of single-edge notch tension specimens, (2022)

[8] Li Yizhe, Investigation on fracture toughness test and structural integrity assessment of high strength X80 pipelines, (2019)

[9] Huang X, Liu Y, Huang X., New constraint parameters based on crack tip plastic zone: Theoretical derivations and effectiveness verification, International Journal of Solids and Structures, 190, pp. 129-147, (2020)

[10] Williams M L., On the stress distribution at the base of a stationary crack[J], Journal of Applied Mechanics, 24, pp. 109-114, (1957)

[1] Souza R, Ruggieri C, Zhang Z., A framework for fracture assessments of dissimilar girth welds in offshore pipelines under bending[J], Engineering Fracture Mechanics, 163, pp. 66-88, (2016)

[2] Pisarski H., Assessment of flaws in pipeline girth welds—a critical review[J], Welding in the World, 57, 6, pp. 933-945, (2013)

[3] Guide to methods for assessing the acceptability of flaws in metallic structures, (2005)

[4] Veritas D N., Fracture control for pipeline installation methods introducing cyclic plastic strain, (2006)

[5] Chao Y, Yang S, Sutton M., On the fracture of solids characterized by one or two parameters: theory and practice[J], Journal of the Mechanics and Physics of Solids, 42, 4, pp. 629-647, (1994)

[6] Zhu X-K, Leis B N., Bending modified J–Q theory and crack-tip constraint quantification[J], International Journal of Fracture, 141, 1, pp. 115-134, (2006)

[7] Xia Congcong, Research on the influence of crack tip constraint on the crack growth resistance curve of single-edge notch tension specimens, (2022)

[8] Li Yizhe, Investigation on fracture toughness test and structural integrity assessment of high strength X80 pipelines, (2019)

[9] Huang X, Liu Y, Huang X., New constraint parameters based on crack tip plastic zone: Theoretical derivations and effectiveness verification, International Journal of Solids and Structures, 190, pp. 129-147, (2020)

[10] Williams M L., On the stress distribution at the base of a stationary crack[J], Journal of Applied Mechanics, 24, pp. 109-114, (1957)