Research on the grouting and setting pressure of the automatic hole sealing device in underground coal mine

被引：0
|
作者：
Li C. [1 ,2 ]
Wang Y. [2 ]
Wang L. [1 ,2 ]
Duan H. [1 ,2 ]
机构：
[1] China Coal Research Institute, Beijing
[2] Xi’an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi’an
来源：
Meitiandizhi Yu Kantan/Coal Geology and Exploration | 2021年 / 49卷 / 02期
关键词：
Grouting pressure; Methane drainage; Sealing device; Setting pressure;
D O I：
10.3969/j.issn.1001-1986.2021.02.032
中图分类号：
学科分类号：
摘要：
Grouting pressure and setting pressure are the main parameters for designing an automatic hole sealing device in coal mine, and they are also the important basis for the design of automatic hole sealing construction. Based on the radial sealing range of the slurry, the paper analyzes the sealing effect under different slurry pressure conditions by means of theoretical calculation and numerical simulation. Combined with the mechanical characteristics of the rubber Mooney-Rivlin model, extrusion seal and other principles, the optimal injection pressure and setting pressure are studied and determined. The results show that the radial sealing range of the slurry at a pressure of 2 to 4 MPa is 2 to 4 m, which can meet the sealing requirements for drilling. When the drilling diameter is 96 to 100 mm, the setting seal pressure of 2.2 to 8.4 MPa can make the device achieve the best setting sealing effect. The results can provide a theoretical basis for the design of the device and provides a theoretical basis for determining the technical parameters of the application of the device. © 2021 Meitiandizhi Yu Kantan/Coal Geology and Exploration. All rights reserved
引用
收藏
页码：253 / 259
页数：6
相关论文
共 25 条
  • [1] LIU Yejiao, YUAN Liang, XUE Junhua, Et al., Analysis on the occurrence law of gas disaster accidents in coal mine from 2007 to 2016[J], Mining Safety & Environmental Protection, 45, 3, pp. 124-128, (2018)
  • [2] LI Quanxin, FANG Jun, Chao XU, Et al., Sampling technology for measuring gas content in coal seam with long distance fixed-point pressure sealing in underground mine[J], Coal Science and Technology, 45, 7, pp. 68-73, (2017)
  • [3] LI Zijun, CHEN Yanli, ZHU Zhuangguan, Hole sealing method of bedding gas drainage borehole[J], Coal Geology & Exploration, 43, 3, pp. 115-117, (2015)
  • [4] LI Hui, GUO Shaoshuai, SU Xun, Development and application of split bag grouting device[J], China Safety Science Journal, 28, 1, pp. 112-117, (2018)
  • [5] QIAO Yuandong, CHENG Hongming, Research on leakage channel and pressurized hole sealing technology for bedding drainage hole based on COMSOL[J], Coal Engineering, 51, 7, pp. 114-119, (2019)
  • [6] LI Ao, Preparation and study on safety performance of pre-grouting material and its application in coal seam gas pressure measurement method, (2018)
  • [7] The State Administration of work safety launched the special action of “mechanized replacement, automated reduction of personnel” to strengthen safety through science and technology, Journal of Safety Science and Technology, 11, 6, (2015)
  • [8] YANG Xiaodong, Handbook of anchoring and slurrying technology, (2009)
  • [9] HE Xiuren, The discussion about the calculation method of slurry pressure and diffusion radius, Nonferrous Metals(Mining Section), 1, pp. 50-53, (1982)
  • [10] HAO Zhiyong, LIN Baiquan, GAO Yabin, Et al., Establishment and application of drilling sealing model in the spherical grouting mode based on the loosing-circle theory, International Journal of Mining Science and Technology, 22, 6, pp. 895-898, (2012)
123