Survey of Automated Flexible Docking Assembly Technology for Large-scale Components

被引：1
|
作者：
Zhao H. [1 ]
Ge D. [1 ]
Luo L. [1 ]
Yin Y. [1 ]
Ding H. [1 ]
机构：
[1] State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2023年 / 59卷 / 14期
关键词：
control; digital measurement technology planning; docking assembly; large components; pose adjustment;
D O I：
10.3901/JME.2023.14.277
中图分类号：
学科分类号：
摘要：
The docking assembly of large components is an important part of the final assembly of large aerospace vehicles. With the increasing demand for rapid response to space missions, such as launching emergency satellites and commercial communication satellites, it is urgent to improve the rapid assembly and launch capability of large aircraft such as launch vehicles. In order to improve the reliability and efficiency of the docking assembly, the assembly mode is moving from the original manual mode to the direction of automation, digitization, and intelligence. The three key technologies involved in the automatic flexible docking assembly of large components are reviewed. The principle, characteristics and application of the pose adjustment mechanism, digital measurement technology, planning and control technology of large-scale component docking assembly are summarized in detail. The future research directions of automatic flexible docking assembly technology for large-scale component are also discussed. © 2023 Chinese Mechanical Engineering Society. All rights reserved.
引用
下载
收藏
页码：277 / 297
页数：20
相关论文
共 134 条
  • [1] ZOU Jihua, LIU Zhicun, FAN Yuqing, Large-size airplane parts digital assembly technology[J], Computer Integrated Manufacturing System, 13, 7, pp. 1367-1373, (2007)
  • [2] XIONG Tao, Automatic docking technology of satellite[J], Aeronautical Manufacturing Technology, 22, pp. 36-39, (2011)
  • [3] MEI Zhongyi, HUANG Chao, FAN Yuqing, Development and prospect of the aircraft digital assembly technology[J], Aeronautical Manufacturing Technology, 18, pp. 32-37, (2015)
  • [4] WEN Ke, DU Fuzhou, ZHANG Tiejun, Et al., Research on design and experiment for digital flexible aligning system of cabin components[J], Aeronautical Manufacturing Technology, 11, pp. 24-31, (2017)
  • [5] XU Guokang, Automatic assembly technology for large aircraft, Acta Aeronautica et Astronautica Sinica, 3, pp. 734-740, (2008)
  • [6] BURLEY G, ODI R, NAING S, Et al., Jigless aerospace manufacture-the enabling technologies, (1999)
  • [7] KIHLMAN H, OSSBAHR G, Et al., Low-cost automation for aircraft assembly, SAE 2004 Aerospace Manufacturing & Automated Fastening Conference & Exhibition, (2004)
  • [8] GRIFFITHS S, NATALE C, ARAUJO R, Et al., The ECHORD project：A general perspective[C], Gearing up and Accelerating Cross‐fertilization between Academic and Industrial Robotics Research in Europe Technology Transfer Experiment form the ECHORD Project, pp. 1-24, (2014)
  • [9] ERDEM I, HELGOSSON P, GOMES A, Et al., Automated flexible tooling for wing box assembly ： Hexapod development study, (2016)
  • [10] MARGUET B, RIBERE B., Measurement-assisted assembly applications on airbus final assembly lines, (2003)
12345678910