Research progress on processing connection and mechanical properties of three-dimensional textile composites

被引：0
|
作者：
Jiang H. [1 ]
Qian K. [1 ]
Zhu Y. [1 ]
Zhang D. [1 ]
机构：
[1] School of Textile Science and Engineering, Jiangnan University, Wuxi
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2023年 / 40卷 / 06期
基金：
中国国家自然科学基金;
关键词：
finite element analysis; mechanical properties; non-destructive testing; processing connection; three-dimensionally textile composite;
D O I：
10.13801/j.cnki.fhclxb.20221104.002
中图分类号：
学科分类号：
摘要：
Three-dimensional (3D) textile composites have the advantages of excellent mechanical properties, designability, and near-net shape, and are regarded as ideal candidates for key components of aviation and aerospace vehicles. The mechanical properties of machining connection of 3D textile composites are the key guarantee in the reliable service. However, the theoretical research in this area is still very weak. Based on the requirements of the major engineering applications such as aerospace and deep sea, this paper focuses on the overview of the connection methods and processes of 3D textile composite materials and structures. Also, the non-destructive testing technologies are presented. Then, the mapping relationships between processing connection and mechanical properties are clarified, and the key issues on processing connection and mechanical properties of 3D textile composites are proposed. It is expected to provide a basis to design and manufacture 3D textile composites with the high-load-bearing and high-reliability for a better applications. © 2023 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：3197 / 3217
页数：20
相关论文
共 73 条
  • [1] ZUO Ping, HE Aijie, LI Wanfu, Et al., Application of continuous fiber reinforced ceramic matrix composites on aeroengine[J], Gas Turbine Experiment and Research, 32, 5, pp. 47-52, (2019)
  • [2] TAKASHI A, TAKESHI N, KOOUN T, Et al., Research of CMC application to turbine components[J], Ihi Engineering Review, 8, 2, pp. 58-62, (2005)
  • [3] WANG Hailei, GAO Yanqiu, FAN Yujiao, Et al., Research and application status of three-dimensional braided composite materials[J], Advanced Materials Industry, 3, pp. 51-54, (2017)
  • [4] MENG Xiangfu, RTM process design of 3D braided composite impeller parts, (2019)
  • [5] CHEN Li, ZHAO Shibo, WANG Xinmiao, Development and application of 3D textile reinforcements in the aerospace field, China Textile Leader, S1, pp. 80-87, (2018)
  • [6] PATEL D K, WAAS A M, YEN C F., Direct numerical simulation of 3D woven textile composites subjected to tensile loading: An experimentally validated multiscale approach[J], Composites Part B: Engineering, 152, pp. 102-115, (2018)
  • [7] MUNOZ R, MARTINEZ V, SKET F, Et al., Mechanical behavi- or and failure micromechanisms of hybrid 3D woven composites in tension[J], Composites Part A: Applied Science and Manufacturing, 59, pp. 93-104, (2014)
  • [8] BOGDANOVICH A E, KARAHAN M, LOMOV S V, Et al., Quasi-static tensile behavior and damage of carbon/epoxy composite reinforced with 3D non-crimp orthogonal woven fabric[J], Mechanics of Materials, 62, pp. 14-31, (2013)
  • [9] HOU Y, HU H, SUN B, Et al., Strain rate effects on tensile failure of 3-D angle-interlock woven carbon fabric[J], Materials & Design, 46, pp. 857-866, (2013)
  • [10] LI D S, YANG Y, JIANG L., Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression[J], Composite Structures, 268, (2021)
12345678