Simulation of Offshore Wind Turbine Blade Docking Based on the Stewart Platform

被引:0
|
作者
Zhang Y. [1 ]
Guo J. [1 ]
Peng H. [1 ]
机构
[1] College of Ocean Science and Engineering, Shanghai Maritime University, Shanghai
关键词
blade docking; Offshore wind turbine; PID; simscape multibody; Stewart platform;
D O I
10.32604/ee.2023.029496
中图分类号
学科分类号
摘要
The windy environment is the main cause affecting the efficiency of offshore wind turbine installation. In order to improve the stability and efficiency of single-blade installation of offshore wind turbines under high wind speed conditions, the Stewart platform is used as an auxiliary tool to help dock the wind turbine blade in this paper. In order to verify the effectiveness of the Stewart platform for blade docking, a blade docking simulation system consisting of the Stewart platform, wind turb ineblade, and wind load calculation module was built based on Simulink/Simscape Multibody. At the same time, the PID algorithm is used to control the Stewart platform so that the blade can effectively track the desired trajectory during the docking process to ensure the successful docking of the blade. Through the simulation of the docking process for blades with a length of 61.5 meters, this paper successfully demonstrates a docking system that might facilitate future docking processes. It also shows that the Stewart platform can effectively reduce the vibration and the movement range of the blade root and improve the stability and efficiency of blade docking. © 2023 Tech Science Press. All rights reserved.
引用
收藏
页码:2489 / 2502
页数:13
相关论文
共 50 条
  • [1] Review of Single Blade Installation and Docking Technology of Large Offshore Wind Turbine
    Xie S.
    Zhao Y.
    Xu Y.
    He Y.
    Han Z.
    Xu Y.
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2023, 57 (06): : 631 - 641
  • [2] A Predictive Maintenance Policy Based on the Blade of Offshore Wind Turbine
    Zhu, Wenjin
    Fouladirad, Mitra
    Berenguer, Christophe
    59TH ANNUAL RELIABILITY AND MAINTAINABILITY SYMPOSIUM (RAMS), 2013,
  • [3] Control of the Platform of an Offshore Wind Turbine
    Monteiro, Celso
    da Costa, Jose Sa
    CONTROLO'2014 - PROCEEDINGS OF THE 11TH PORTUGUESE CONFERENCE ON AUTOMATIC CONTROL, 2015, 321 : 313 - 320
  • [4] Optimization Simulation of Mooring System of Floating Offshore Wind Turbine Platform Based on SPH Method
    Du, Weibo
    Jiao, Peigang
    Li, Kangning
    Ding, Jiaming
    ENERGY SCIENCE & ENGINEERING, 2024, 12 (12) : 5356 - 5369
  • [5] Exploring inflow wind condition on floating offshore wind turbine aerodynamic characterisation and platform motion prediction using blade resolved CFD simulation
    Zhou, Yang
    Xiao, Qing
    Liu, Yuanchuan
    Incecik, Atilla
    Peyrard, Christophe
    Wan, Decheng
    Pan, Guang
    Li, Sunwei
    RENEWABLE ENERGY, 2022, 182 : 1060 - 1079
  • [6] Simulation of flow of the blade wind turbine
    Tanasheva, N. K.
    Shrager, E. R.
    Dyusembaeva, A. N.
    Kussaiynova, A. K.
    Ospanova, D. A.
    Bakhtybekova, A. R.
    BULLETIN OF THE UNIVERSITY OF KARAGANDA-PHYSICS, 2016, 4 (84): : 20 - 23
  • [7] IMPACT OF ROTOR MISALIGNMENT DUE TO PLATFORM MOTIONS ON FLOATING OFFSHORE WIND TURBINE BLADE LOADS
    Smith, Rachael E.
    Pillai, Ajit C.
    Tabor, Gavin
    Thies, Philipp R.
    Johanning, Lars
    PROCEEDINGS OF THE ASME 38TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2019, VOL 10, 2019,
  • [8] Structural design of offshore wind turbine blade spars
    Boudounit, Hicham
    Tarfaoui, Mostapha
    Saifaoui, Dennoun
    El Garouge, Salwa
    WIND ENGINEERING, 2022, 46 (02) : 343 - 360
  • [9] A floating platform of concrete for offshore wind turbine
    Hua, Jianbo
    JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2011, 3 (06)
  • [10] Design and optimisation of a 20 MW offshore wind turbine blade
    Koragappa, Pavana
    Verdin, Patrick G.
    OCEAN ENGINEERING, 2024, 305