Design and optimization of temperature sensor based on magneto strictive torsional wave

被引：0
|
作者：
Li B. [1 ,2 ]
Li M. [1 ,2 ]
Li H. [1 ,2 ]
Weng L. [1 ,2 ]
Huang W. [1 ,2 ]
机构：
[1] State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Hebei University of Technology, Tianjin
[2] Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province, Hebei University of Technology, Tianjin
来源：
Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument | 2022年 / 43卷 / 10期
关键词：
Magnetostrictive torsional waves; Output voltage; Temperature sensor; Thermos-sensitive material; Wave speed;
D O I：
10.19650/j.cnki.cjsi.J2209552
中图分类号：
学科分类号：
摘要：
The ultrasonic guided wave temperature sensor is currently an emerging temperature measuring instrument in the industrial field, and the selection of its guided wave has important impact on the performance of the sensor. Magnetostrictive torsional wave is suitable for the application, as the basis for temperature measurement with its wave speed proportional to the temperature as well as the characteristics of low decay and easily pick-up. In this article, the magnetostrictive material Fe83Ga17 wire is selected to generate and conduct magnetostrictive torsional waves. The relationship between the flight time and temperature of the torsional wave at a fixed distance is calculated to achieve the fitting relationship between the wave velocity and temperature. According to the fitting relationship and the measured torsional wave velocity, the temperature measurement is realized, and an output voltage model based on a magnetostrictive torsional wave temperature sensor is proposed. In experiments, the output voltage of the magnetostrictive temperature sensor reaches 215.7~465.2 mV under the room temperature up to 500℃. The fitting relationship between the measured temperature and the wave velocity can be used as a basis for temperature measurement. To increase the upper temperature measurement limit of the temperature sensor, Fe83Ga17 wire is coupled with the heat sensitive material Ni20Cr80 wire into a new waveguide wire, and the temperature sensor after structural optimization is obtained. The unamplified output voltage of the optimized sensor reaches 44.9~85.6 mV under the temperature from room temperature up to 1 200℃. The wave speed of the torsion wave remains highly proportional to the temperature in the temperature region, which is capable for reliable temperature measurement under 1 200℃. © 2022, Science Press. All right reserved.
引用
收藏
页码：58 / 65
页数：7
相关论文
共 16 条
  • [1] LAURIE M, MAGALLON D, REMPE J, Et al., Ultrasonic high-temperature sensors: Past experiments and prospects for future use, International Journal of Thermophysics, 31, 8-9, pp. 1417-1427, (2010)
  • [2] LI ZH, ZHOU X ZH, DONG CH L, Et al., Ultrasonic thermometry algorithm based on inverse quadratic function, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 68, pp. 1876-1884, (2020)
  • [3] WEI Y L, GAO W, GAO Y B, Et al., A measurement system of high-temperature oxidation environment with ultrasonic Ir<sub>0.6</sub>Rth<sub>0.4</sub> alloy thermometry, Ultrasonics, 89, pp. 102-109, (2018)
  • [4] ZHAO G CH, YI T X, SONG L P, Et al., Research status and development prospect of optical fiber high-temperature sensors, Advanced Materials Research, 2912, pp. 1388-1393, (2014)
  • [5] SURESH P, PRABHU R, KRISHNAN B, Et al., Torsional mode ultrasonic helical waveguide sensor for re-configurable temperature measurement, Journal of Technology & Science, 49, pp. 580-583, (2016)
  • [6] WEI Y L, WANG G, GUO Q, Et al., Basic study on temperature detection based on magneto strictive ultrasonic guide wave, Fire Control & Command Control, 41, 7, pp. 171-174, (2016)
  • [7] LI Y Y, WANG B W, HUANG W M, Et al., Output characteristics and experiments of magnetostrictive displacement sensor considering stress wave attenuation, Chinese Journal of Scientific Instrument, 39, 7, pp. 34-41, (2018)
  • [8] CARMAN G P, MITROVIC M., Nonlinear constitutive relations for magnetostrictive materials with applications to 1-D problems, Journal of Intelligent Material Systems and Structures, 6, pp. 673-683, (1995)
  • [9] LI M M, LI J H, BAO X Q, Et al., Magnetostrictive Fe<sub>8</sub><sub>2</sub>Ga<sub>13.5</sub>Al<sub>4.5</sub> wires with large Wiedemann twist over wide temperature range, Materials & Design, 135, pp. 197-203, (2017)
  • [10] DAPINO M J, SMITH R C, FLATAU A B., Structural magnetic strain model for magnetostrictive transducers, IEEE Transactions on Magnetics, 36, pp. 545-556, (2000)
12