Research on Cutter Path Generation for 5-Axis U Cycloid Milling Based on Dimension Reduction Mapping

被引：0
|
作者：
Feng J. [1 ]
Wei Z. [1 ]
Wang M. [1 ]
Shu X. [2 ]
Zhang Y. [2 ]
Yong J. [2 ]
机构：
[1] Key Laboratory for Precision and Non-traditional Machining Technology of Ministry of Education, Dalian University of Technology, Dalian
[2] Shenyang Blower Works Group Corporation, Shenyang
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 05期
关键词：
5-axis milling; cutter path; cutter-workpiece wrap angle; dimension reduction mapping; U cycloid milling;
D O I：
10.3901/JME.2024.05.362
中图分类号：
学科分类号：
摘要：
As an important part of NC machining, cutter path generation is a complex system including many factors such as milling mode, tool workpiece structure and machining allowance. U cycloid milling is a cutter path strategy that integrates the advantages of cycloid milling and flank milling. It can complete rough machining with large axial cutting depth. The cutter path form of gentle cut in and cut out can effectively stable the cutting force and the local load is dispersed. Aiming at the flow path of integral impeller, a cutter path generation method for U cycloid milling based on dimension reduction mapping is proposed. The geometric model of U cycloid milling is established, the cycloid feature parameters are defined, and the calculation method of cycloid residue is given. According to the rule of tool motion, the path is discretized into a series of micro elements. Based on the intersection of the tool and the previous cutter path, the path is divided into multiple regions, and the calculation methods of the cutter-workpiece wrap angle under the corresponding cycloidal position angle are obtained respectively. Combined with U cycloid milling features, the milling boundary preprocessing method is established. Considering the complexity of cutter path calculation in 3D space, the space geometry domain and dimension reduction parameter domain are defined. On this basis, the dimension reduction mapping method of tiled small arc segment is given and the dimension reduction paths are calculated in different cycloid intervals. In order to obtain interference free U cycloid milling cutter axis vector, a double-action ratio domain mapping algorithm is established by using the isoparametric equation, and arbitrary vector inverse mapping is realized by solving a series of deflection angles. Finally, the trajectory matrix is coded into general machine tool language, and the feasibility of the strategy is verified through simulation studies and milling experiments. © 2024 Chinese Mechanical Engineering Society. All rights reserved.
引用
收藏
页码：362 / 377
页数：15
相关论文
共 39 条
  • [1] FU Youzhi, Hang GAO, Xuanping WANG, Et al., Machining the integral impeller and blisk of aero-engines ： A review of surface finishing and strengthening technologies[J], Chinese Journal of Mechanical Engineering, 30, pp. 528-543, (2017)
  • [2] CHEN Haohui, LIU Huaming, SUN Chunhua, Numerical control machining method and error calculation of engine impeller side milling, Journal of Mechanical Engineering, 39, 7, pp. 143-145, (2003)
  • [3] Hongzhou FAN, Guang XI, WANG Wei, Et al., An efficient five-axis machining method of centrifugal impeller based on regional milling[J], The International Journal of Advanced Manufacturing Technology, 87, pp. 789-799, (2016)
  • [4] ALBERRO A, ROJAS H, EGEA A J S A，, Et al., Model based on an effective material-removal rate to evaluate specific energy consumption in grinding[J], Materials, 12, 6, (2019)
  • [5] WANG Xiaojuan, SONG Qinghua, Zhanqiang LIU, Dynamic model and stability prediction of thin-walled component milling with multi-modes coupling effect[J], Journal of Materials Processing Technology, 288, (2021)
  • [6] ELMIDANY T T, ELKERAN A, TAWFIK H., Toolpath pattern comparison ： Contour-parallel with direction-parallel[J], Geometric Modeling and Imaging-New Trends (GMAI'06), pp. 77-82, (2006)
  • [7] Tao CHEN, Jiaqiang LIU, Gang LIU, Et al., Experimental study on titanium alloy cutting property and wear mechanism with circular-arc milling cutters[J], Chinese Journal of Mechanical Engineering, 36, pp. 1-11, (2023)
  • [8] LEE S, KIM H, YANG M., Mesh-based tool path generation for constant scallop-height machining[J], The International Journal of Advanced Manufacturing Technology, 37, pp. 15-22, (2008)
  • [9] KIM B H, CHOI B K., Guide surface based tool path generation in 3-axis milling：An extension of the guide plane method[J], Comput. Aided Des, 32, pp. 191-199, (2000)
  • [10] CHU C, CHEN H, CHANG C., Continuity-preserving tool path generation for minimizing machining errors in five-axis CNC flank milling of ruled surfaces[J], Journal of Manufacturing Systems, 55, pp. 171-178, (2020)
1234