Corrosion behavior of wire arc additive manufactured Inconel 718 superalloy

被引：0
|
作者：
Zhang, L.N. [1 ]
Ojo, O.A. [1 ]
机构：
[1] Mechanical and Manufacturing Engineering, University of Manitoba, Winnipeg,R3T 5V6, Canada
来源：
Journal of Alloys and Compounds | 2021年 / 829卷
基金：
加拿大自然科学与工程研究理事会;
关键词：
Corrosion behavior - Inconel 718 superalloys - Passivation properties - Passive films - Postdeposition heat treatment - Potentiostatic polarization - Thermodynamic calculations - Wrought alloys;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The corrosion behavior of Inconel 718 (IN718) superalloy fabricated using wire-arc additive manufacturing (WAAM) and post-deposition heat treatment is investigated and compared to that of wrought alloy. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) analyses show that the corrosion resistance of heat-treated WAAM IN718 (WAAM-HT IN718) is inferior to that of heat-treated wrought alloy (wrought-HT). Potentiostatic polarization and X-ray photoelectron spectroscopy (XPS) are used to analyze passivation properties of the materials. The results indicate that in comparison to the wrought-HT material, the passive film formed on the WAAM-HT IN718 contains more NiO, which is porous and less protective than Cr2O3. The formation of more NiO and lesser Cr2O3 in the passive film formed on the WAAM-HT IN718 could be related to its {100} (Cube) texture. Moreover, based on thermodynamic calculations, Nb depletion in its gamma matrix, due to selective partitioning of Nb into Laves phase and delta phase particles, can also contribute to formation of the porous passive film. © 2020 Elsevier B.V.
引用
收藏
相关论文
共 50 条
  • [1] Corrosion behavior of wire arc additive manufactured Inconel 718 superalloy
    Zhang, L. N.
    Ojo, O. A.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 829
  • [2] Effects of Processing Parameters on Wire Arc Additive Manufactured Inconel® 718
    Hejripour, F.
    Aidun, D. K.
    [J]. WELDING JOURNAL, 2021, 100 (03) : 93S - 105S
  • [3] High temperature performance of wire-arc additive manufactured Inconel 718
    William Sean James
    Supriyo Ganguly
    Goncalo Pardal
    [J]. Scientific Reports, 13 (1)
  • [4] High temperature performance of wire-arc additive manufactured Inconel 718
    James, William Sean
    Ganguly, Supriyo
    Pardal, Goncalo
    [J]. SCIENTIFIC REPORTS, 2023, 13 (01):
  • [5] Mechanical and corrosion characteristics of heat-treated wire arc additive manufactured parts of Inconel ® 625 superalloy
    Delfino, Fabio Henrique Silva
    Koga, Guilherme Yuuki
    Cavalcante, Thiago R. F.
    Bon, Douglas
    Giarola, Joseane
    Shen, Jiajia
    Oliveira, Joao Pedro
    Lopes, Eder Socrates Najar
    Avila, Julian Arnaldo
    [J]. PROGRESS IN ADDITIVE MANUFACTURING, 2024,
  • [6] Analyses of Anodically Formed Passive Film and Corrosion Behavior of Wire-arc Additive Manufactured ATI 718Plus® Superalloy
    Zhang, Lina
    Qi, Liang
    Deng, Shenghua
    Oguntuase, Oluwasanmi
    Deng, Tongsheng
    Wang, Hebin
    Ojo, Olanrewaju A.
    [J]. ADDITIVE MANUFACTURING, 2021, 48
  • [7] Microstructure, Mechanical Properties and Corrosion Behavior of Inconel 617 Superalloy Fabricated by Wire Arc Additive Manufacturing
    B. Avinash
    K. Manikanda Subramanian
    V. Rajkumar
    [J]. Journal of Materials Engineering and Performance, 2023, 32 : 6270 - 6280
  • [8] Microstructure, Mechanical Properties and Corrosion Behavior of Inconel 617 Superalloy Fabricated by Wire Arc Additive Manufacturing
    Avinash, B.
    Subramanian, K. Manikanda
    Rajkumar, V
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (14) : 6270 - 6280
  • [9] The influence of microstructural anisotropy on the hot deformation of wire arc additive manufactured (WAAM) Inconel 718
    Lan, Bo
    Wang, Yaping
    Liu, Yuehan
    Hooper, Paul
    Hopper, Christopher
    Zhang, Guodong
    Zhang, Xuejun
    Jiang, Jun
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 823
  • [10] Hot corrosion behaviour of wire-arc additive manufactured Ni-based superalloy ATI 718Plus®
    Asala, G.
    Andersson, J.
    Ojo, O. A.
    [J]. CORROSION SCIENCE, 2019, 158
12345