A Hybrid Actuator Model for Efficient Guided Wave-Based Structural Health Monitoring Simulations

Simulation has been recognized as a promising option to reduce the time and costs associated with determining probability of detection curves to demonstrate the performance of guided wave-based structural health monitoring (GW-SHM) systems. Time-domain transient spectral finite element schemes have been used for large GW-SHM simulation campaigns, but the most common piezoelectric transducer model used for actuation, the pin force model, has limitations in terms of its range of validity. This is because the excitation frequency for the pin force model has only been validated far below the first electromechanical resonance frequency of the piezoelectric transducer mainly due to not considering the normal stress and dynamics of the transducer. As a result, the value of simulation tools for performance demonstrations may be limited. To address this limitation, this paper introduces a hybrid actuator model that integrates frequency-dependent complex interfacial stresses in both the shear and normal directions, computed using finite elements. These surface stresses are compatible with time-domain transient spectral finite element schemes, enabling their seamless integration without compromising the required performance for conducting intensive simulation campaigns. The proposed hybrid actuator model undergoes validation through a combination of simulation and experimental studies. Additionally, a comprehensive parametric study is conducted to assess the model’s validity across a wide range of excitation frequencies. The results demonstrate the accurate representation of the transduction signal above the piezoelectric transducer’s first free electromechanical resonance frequency. © 2024 by ASME.