Anti-icing performance test investigation on hollowed patterning electric heating module

被引：0
|
作者：
Yang Q. [1 ]
Zhu Y. [1 ]
Chen H. [2 ]
Liu X. [2 ]
机构：
[1] Shaanxi Province Aircraft Environment Control Key Laboratory, AVIC The First Aircraft Institute, Xi’an
[2] School of Mechanical Engineering and Automation, Beihang University, Beijing
来源：
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2023年 / 44卷
关键词：
anti-icing performance; electric heating anti-icing system; hollow; icing wind tunnel test; patterning;
D O I：
10.7527/S1000-6893.2023.29334
中图分类号：
学科分类号：
摘要：
To satisfy the requirements of composite material structures with both radio frequency signal transmission performance and anti-icing performance, a method is put forward to use the hollowed patterning electric heating module as the core part of the electric heating anti-icing system. Two typical hollowed patterning electric heating modules are tested to evaluate the anti-icing performance in the icing wind tunnel. The results show that the shape of the hollowed patterning and the hollowed ratio are the main factors affecting the size of the residual ice, the surface temperature distribution and the potential for runback ice formation. Under certain test conditions, regular residual ice particles are produced in the protection areas, with the regularity of periodic shedding. © 2023 Chinese Society of Astronautics. All rights reserved.
引用
收藏
相关论文
共 19 条
  • [1] KIND R J, POTAPCZUK M G, FEO A, Et al., Experimental and computational simulation of in-flight icing phenomena[J], Progress in Aerospace Sciences, 34, 5-6, pp. 257-345, (1998)
  • [2] QIU X G, HAN F H., Aircraft anti-icing system, (1985)
  • [3] ZHU Y F, ZHANG M, ZHOU J F, Et al., Civil aircraft anti-icing and de-icing system, pp. 17-20, (2021)
  • [4] LIU D J, CHEN Y L., Application of new type of composite wing deicing system in Boeing 787, Aeronautical Manufacturing Technology, 52, 17, pp. 82-83, (2009)
  • [5] HU L Q., Application status and technical difficulties for civil aircraft wing electrothermal anti-/de-icing, Aeronautical Science & Technology, 27, 7, pp. 8-11, (2016)
  • [6] XIAO C H, GUI Y W, LIN G P., A review of studies of aircraft electrothermal de-icing, Science & Technology Review, 29, 18, pp. 69-73, (2011)
  • [7] MA L Y, XIONG L Y, LIU L Q, Et al., Experimental study on electro-thermal deicing technique for carbon fiber composite, Acta Aeronautica et Astronautica Sinica, 33, 1, pp. 54-61, (2012)
  • [8] WEI J, LI H, ZHANG Y N, Et al., Research progress of graphene composites in the field of electrothermal anti-icing/deicing, Materials China, 41, 6, pp. 487-496, (2022)
  • [9] TANG C, XIE W J, YUAN P Y, Et al., Development and verification of a conformal electrothermal deicing functional structure for leading edge of airfoil, Acta Aeronautica et Astronautica Sinica, 44, 12, pp. 331-341, (2023)
  • [10] JANAS D, KOZIOL K K., A review of production methods of carbon nanotube and graphene thin films for electrothermal applications, Nanoscale, 6, 6, pp. 3037-3045, (2014)
12