Surface roughness diagnosis in hard turning using acoustic signals and support vector machine: A PCA-based approach

被引：0
|
作者：
Papandrea, Pedro J. [1 ]
Frigieri, Edielson P. [1 ]
Maia, Paulo Roberto [1 ]
Oliveira, Lucas G. [1 ]
Paiva, Anderson P. [1 ]
机构：
[1] Federal University of Itajuba, BPS Avenue, 1303, Pinheirinho, Itajubá, MG,37500-903, Brazil
来源：
Applied Acoustics | 2020年 / 159卷
关键词：
During the last years; notable efforts have been made to develop reliable and industrially applicable machining monitoring systems based on different types of sensors; especially indirect methods that do not require the interruption of the machining process. As the main objective in machining processes is to produce a high-quality surface finish which; however; can be measured only at the end of the machining cycle; a more preferable method would be to monitor the quality during the cycle. Motivated by that premise; do not interrupt the machining process; results of investigation on the relationship between audible sound emitted during process and the resulted surface finish are reported in this paper. Through experiments with AISI 52100 hardened steel; this paper shows that such a correlation does exist between the surface roughness and the sound energy; and based on that correlation; a new quality monitoring method is proposed using Support Vector Machines (SVM) approached by the Principal Component Analysis (PCA). Obtained results shown that this method can identify three different levels of surface roughness achieving an average accuracy of 100.00%. © 2019 Elsevier Ltd;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [1] Surface roughness diagnosis in hard turning using acoustic signals and support vector machine: A PCA-based approach
    Papandrea, Pedro J.
    Frigieri, Edielson P.
    Maia, Paulo Roberto
    Oliveira, Lucas G.
    Paiva, Anderson P.
    APPLIED ACOUSTICS, 2020, 159
  • [2] A mel-frequency cepstral coefficient-based approach for surface roughness diagnosis in hard turning using acoustic signals and gaussian mixture models
    Frigieri, Edielson P.
    Campos, Paulo H. S.
    Paiva, Anderson P.
    Balestrassi, Pedro P.
    Ferreira, Joao Roberto
    Ynoguti, Carlos A.
    APPLIED ACOUSTICS, 2016, 113 : 230 - 237
  • [3] Structural damage detection based on variational mode decomposition and kernel PCA-based support vector machine
    Bisheh, Hossein Babajanian
    Amiri, Gholamreza Ghodrati
    ENGINEERING STRUCTURES, 2023, 278
  • [4] Classification of acoustic noise signals using wavelet spectrum based support vector machine
    Cha, Kyung Joon
    Yoo, Kook-Hyun
    Lee, Chin Uk
    Mun, Byeong Min
    Bae, Suk Joo
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2018, 32 (06) : 2453 - 2462
  • [5] Classification of acoustic noise signals using wavelet spectrum based support vector machine
    Kyung Joon Cha
    Kook-Hyun Yoo
    Chin Uk Lee
    Byeong Min Mun
    Suk Joo Bae
    Journal of Mechanical Science and Technology, 2018, 32 : 2453 - 2462
  • [6] Surface roughness prediction as a classification problem using support vector machine
    Abu-Mahfouz, Issam
    El Ariss, Omar
    Rahman, A. H. M. Esfakur
    Banerjee, Amit
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (1-4): : 803 - 815
  • [7] Surface roughness prediction as a classification problem using support vector machine
    Issam Abu-Mahfouz
    Omar El Ariss
    A. H. M. Esfakur Rahman
    Amit Banerjee
    The International Journal of Advanced Manufacturing Technology, 2017, 92 : 803 - 815
  • [8] Typical signal anomaly monitoring and support vector regression-based surface roughness prediction with acoustic emission signals in single-point diamond turning
    Tang, Ke-Er
    Weng, Chi-Yu
    Cheng, Yuan-Chieh
    Liu, Chun-Wei
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 112 : 126 - 135
  • [9] Endpoint Phosphorus Content Prediction in BOF Steelmaking Using PCA-Based Support Vector Regression
    Mukherjee, Sankha
    Barui, Sandip
    Chattopadhyay, Kinnor
    Iron and Steel Technology, 2022, 19 (02):
  • [10] A Comprehensive Analysis of Surface Roughness, Vibration, and Acoustic Emissions Based on Machine Learning during Hard Turning of AISI 4140 Steel
    Asilturk, Ilhan
    Kuntoglu, Mustafa
    Binali, Rustem
    Akkus, Harun
    Salur, Emin
    METALS, 2023, 13 (02)
12345