Performance analysis and response surface optimization of multi-stage spray flash desalination system

被引：0
|
作者：
Cai B. [1 ]
Guo M. [1 ]
Che X. [1 ]
Cai W. [1 ]
机构：
[1] School of Energy and Power Engineering, Northeast Electric Power University, Jilin
来源：
Huagong Xuebao/CIESC Journal | 2021年 / 72卷 / 11期
关键词：
Desalination; Flash evaporation; Influencing factors; Numerical analysis; Optimal design;
D O I：
10.11949/0438-1157.20210952
中图分类号：
学科分类号：
摘要：
The spray flash technology has become one of the effective methods to solve the shortage of fresh water resources due to its low energy consumption, good separation effect and high cooling capacity. Based on the spray-assisted low-temperature desalination technology, this paper develops the thermodynamic calculation of the internal heat and mass balance of the system, and studies the effect of the spray flash system's operating stages and the top brine temperature on the flash evaporation effect. The research results show that a higher top brine temperature can significantly improve production efficiency. When the top brine temperature is 363 K, the productivity is 3.325 kg/s and the performance ratio is 0.627. Response surface method is used to optimize the spray flash evaporation system, determine the best operating conditions of the system and the model relationship of each response. And the best parameters of the system for desalination are obtained: the top brine temperature is 343 K, the seawater inlet flow rate is 10 kg/s, the cooling water inlet temperature is 303 K, and the cooling water inlet flow rate is 9.5 kg/s. © 2021, Editorial Board of CIESC Journal. All right reserved.
引用
收藏
页码：5573 / 5581
页数：8
相关论文
共 33 条
  • [1] Zheng Z Y, Li F C, Li Q, Et al., State-of-the-art of R & D on seawater desalination technology, Chinese Science Bulletin, 61, 21, pp. 2344-2370, (2016)
  • [2] Zhou H, Fan M H, Yang H Y., Study and measurement on the high-efficiency atomization characteristics of nozzle with an in-line distributor, Chinese Journal of Mechanical Engineering, 40, 8, pp. 110-114, (2004)
  • [3] Cao T Y, Song L F., The design of the porous plate in flash chamber of multi-stage seawater desalination device, Journal of Northeast Electric Power University, 38, 6, pp. 42-47, (2018)
  • [4] Duan R Q, Jiang S Y, Koshizuka S, Et al., Direct simulation of flashing liquid jets using the MPS method, International Journal of Heat and Mass Transfer, 49, 1, pp. 402-405, (2006)
  • [5] Duan R Q, Jiang S Y, Zhang Y J, Et al., Direct numerical simulation of flashing liquid injection by moving particle semi-implicit method, Atomic Energy Science and Technology, 40, 1, pp. 61-66, (2006)
  • [6] Ji C, Wang N H, Cui Z, Et al., Evaporation characteristics of spray flash evaporation at high temperature and high pressure, CIESC Journal, 67, 5, pp. 1771-1777, (2016)
  • [7] Ji C, Wang N H, Cui Z, Et al., Role and influence of characteristic Jakob number in high-temperature and high-pressure flash evaporation process, CIESC Journal, 67, 10, pp. 4153-4159, (2016)
  • [8] Wu Y Y, Zhang X S, Zhang X L., Simplified analysis of heat and mass transfer model in droplet evaporation process, Applied Thermal Engineering, 99, pp. 938-943, (2016)
  • [9] Wu Y Y, Zhang X S, Zhang X L, Et al., Modeling and experimental study of vapor phase-diffusion driven sessile drop evaporation, Applied Thermal Engineering, 70, 1, pp. 560-564, (2014)
  • [10] Hosseini Araghi A, Khiadani M, Sadafi M H, Et al., A numerical model and experimental verification for analysing a new vacuum spray flash desalinator utilising low grade energy, Desalination, 413, pp. 109-118, (2017)
1234