Characteristics of selective non-catalytic reduction of NOx with solid polymer denitration agent

被引：0

作者：

Zhu C. ^{[1
,2
]}

Ru J. ^{[1
]}

Sun T. ^{[1
]}

Xie X. ^{[1
]}

Li C. ^{[3
]}

Gao S. ^{[2
]}

机构：

[1] Everbright Environmental Technology (China) Co., Ltd., Incineration Technology Research Institute, Jiangsu, Nanjing

[2] State Key Laboratory of Multi-phase Complex Systems, Institute of Process Engineering, CAS, Beijing

[3] School of Ecology and Environment, Beijing Technology and Business University, Beijing

来源：

Huagong Jinzhan/Chemical Industry and Engineering Progress | 2023年 / 42卷 / 09期

关键词：

denitration efficiency; polymer non-catalytic reduction (PNCR); polymers; reduction; selectivity;

D O I：

10.16085/j.issn.1000-6613.2022-1997

中图分类号：

学科分类号：

摘要：

The denitration efficiency, influencing factors and reaction mechanism of selective non-catalytic reduction of NOx with solid polymer denitration agent (PNCR) were explored in a fluidized bed reactor. The results showed that the denitration using solid denitration agent was mainly a non-catalytic reduction reaction. As temperature increased from 850℃ to 1150℃, the denitration efficiency increased with temperature, with the highest denitration efficiency of 97% at 950℃, and then the denitration efficiency decreased due to the high-temperature oxidation. The reaction did not need the oxygen and the denitration efficiency gradually decreased as the oxygen concentration increased. Steam addition could weaken the oxidation of denitration agent by O2 and delay the high-temperature oxidation reaction. In the thermal decomposition of solid denitration agent, O element mainly escaped in the form of CO2. And N and C elements were converted into active free radicals such as NH, CH2 and CN. CH2 and CN could react and thus consumed the strong oxidizing groups (e. g., O2, O and OH) in the furnace, and inhibit the formation of NO, which might further accelerate the reduction reaction of NH and other free radicals with NO to achieve high denitration efficiency. The research results could provide theoretical support and technical reference for the applications of polymer denitration technology. © 2023 Chemical Industry Press. All rights reserved.

引用

页码：4939 / 4946

页数：7

共 27 条

[1] Emission standard of air pollutants for boiler in Shandong province: DB37/2374—2013, (2013)
[2] TANG Qian, ZHENG Bo, XUE Wenbo, Et al., Contributors to air pollutant emission changes in autumn and winter in Beijing-Tianjin-Hebei and surrounding areas, Environmental Science, 42, 4, pp. 1591-1599, (2021)
[3] LIU Guangtao, GUO Hanjun, LI Fang, Study of low temperature selective catalytic regeneration of denitrification in municipal solid waste incineration flue gas, Environmental Protection and Technology, 19, 6, pp. 22-25, (2013)
[4] LIU Lu, SUN Zhongtao, Application of exhaust gas recycling denitration technology in municipal solid waste incineration power plant, Environmental Sanitation Engineering, 26, 6, pp. 83-86, (2018)
[5] ZHU Chuanqiang, RU Jinbo, HU Mingdong, Et al., Application analysis of polymer non-catalytic reduction of NO<sub>x</sub> in waste incineration, Journal of Engineering Thermophysics, 42, 6, pp. 1600-1607, (2021)
[6] DU Liming, Absorbents preparation and removal mechanism research for simultaneous desulfurization and denitrification by flue gas circulating fluidized bed, (2007)
[7] pp. 304-311
[8] LIU Huanlian, PANG Bo, Process selection and case analysis on denitration of waste incineration flue gas, Environmental Sanitation Engineering, 26, 6, pp. 19-22, (2018)
[9] GAO Yuan, GAO Jinhao, Technical and economic analysis of solid urea direct injection SNCR denitrification, Sulphuric Acid Industry, 3, pp. 24-27, (2018)
[10] GAO Jinhao, GAO Yuan, Technical and economic comparison of denitrification of MSW incineration flue gas with ultra-low emission, Sulphuric Acid Industry, 2, pp. 35-37, (2020)

← 1 2 3 →