Activation of peroxymonosulfate by Fe–Mn-modified MWCNTs for selective decontamination: Formation of high-valent metal-oxo species and superoxide anion radicals

The extensive presence of organic micropollutants in complex water matrices requires the development of selective oxidation technologies. In this study, a novel selective oxidation process was developed via the conjunction of FeMn/CNTs with peroxymonosulfate and successfully used to remove micropollutants such as sulfamethoxazole (SMX) and bisphenol A from aqueous solutions. FeMn/CNTs were prepared using a facile co-precipitation method, characterized using a series of surface characterization techniques, and then tested for pollutant removal. The results showed that the FeMn/CNTs had much greater reactivity than CNTs, manganese oxide, and iron oxide. The pseudo-first-order rate constant with FeMn/CNTs was more than 2.9–5.7 times that of the other tested materials. The FeMn/CNTs had great reactivity in a wide range of pH values from 3.0 to 9.0, with the best reactivity found at pH values of 5.0 and 7.0. High-valent metal-oxo species such as Fe(IV)[dbnd]O and Mn(IV)[dbnd]O and superoxide anion radicals were determined to be the reactive species and were responsible for the oxidation of SMX. These reactive species were selective; therefore, the overall removal performance of SMX was not obviously influenced by high levels of water components including chloride ions, bicarbonates, and natural organic matters. The results from this study may promote the design and application of selective oxidation technologies for micropollutant abatement. © 2023 Elsevier Ltd