Construction and application of overburden damage and aquifer water loss model in medium-deep buried coal seam mining in Yushen mining area

被引：0
|
作者：
Zhao C. [1 ,2 ]
Jin D. [1 ,2 ]
Wang H. [1 ,2 ]
Wang Q. [1 ,2 ]
Wang S. [1 ,2 ]
Liu Y. [1 ,2 ]
机构：
[1] Xi'an Research Institute, China Coal Technology & Engineering Group Corp, Xi'an
[2] Shaanxi Key Laboratory of Prevention and Control Technology for Coal Mine Water Hazard, Xi'an
来源：
Meitan Xuebao/Journal of the China Coal Society | 2019年 / 44卷 / 07期
关键词：
Loose aquifer; Numerical simulation; Rock deformation; Water loss; Water-conducting fractured zone;
D O I：
10.13225/j.cnki.jccs.2019.0159
中图分类号：
学科分类号：
摘要：
Overburden deformation and damage caused by coal seam mining is the main cause of water loss from aquifer. This paper aims at the problem of limited research on the water loss law of aquifer under the influence of mining the medium and deep coal seams in Yushen mining area. According to the geological and hydrogeological structure characteristics of overburden rock of main mining seam in Yushen mining area, the authors summarize and put forward the "lateral direct and vertical leakage" combined water loss model of aquifer under the influence of damage and deformation of overburden in medium and deep seam mining. On the platform of COMSOL multi-physical field coupled numerical analysis software, the method of constructing numerical analysis model of deformation damage of overburden and water loss of aquifer in medium-deep coal seam mining is put forward. ① Using the rock mechanics module of the software, the coupling relationship of overburden mining stress, porosity and permeability is established under the condition of coal seam mining. The displacement and deformation of each subdivision node of overburden in bending zone are simulated and the change of mining permeability coefficient is calculated. The Mohr-Coulomb plastic failure criterion is used to identify the range of water-conducting fracture zone under mining disturbance. ② The secondary subdivision mesh under mining deformation is formed by relying on the auto-subdivision function of large deformation geometry in COMSOL software platform. ③ According to the transformation characteristics of groundwater flow between aquifer and water-conducting fractured zone, the range of mining-induced aquifer fractured zone is numerically treated as Darcy seepage boundary, and re-input the parameters of mining permeability coefficient in the Darcy seepage analysis module. Finally, taking Caojiatan Coal Mine in Yushen mining area as an example, an analysis model of deformation damage of overburden and water loss of aquifer in coal seam mining at working face scale is established. the simulation results show that the maximum height of water-conducting fractured zone is 128 m under the condition of stratified mining (5 m mining height) the 2-2 coal, which develops into the aquifer of bedrock of Zhiluo and Yan'an Formation results in 35. 84 m3/h of total water loss, and the lateral direct loss and the vertical loss are 23.17 and 12.67 m3/h respectively, which has little influence on the loose aquifer. The maximum height of water-conducting fractured zone is 202 m under the condition of full mining height (10 m mining height), and develops into the weathered strata with well water abundance, results in 130.31 m3/h of total water loss, the lateral direct and vertical water loss increase to 92.65 and 37.66 m3/h respectively, which has great influence on loose aquifer. © 2019, Editorial Office of Journal of China Coal Society. All right reserved.
引用
收藏
页码：2227 / 2235
页数：8
相关论文
共 24 条
  • [1] Wang S., Huang Q., Fan L., Et al., Coal development and ecological water level protection in ecologically fragile areas, Coal Geology of China, 35, 1, pp. 7-14, (2010)
  • [2] Wo B., Peng J., Xiang M., Et al., Study on the aquifer of the Salawusu Formation protected by water-retaining mining in Yushenfu mining area, Journal of Mining & Safety Engineering, 35, 5, pp. 984-990, (2018)
  • [3] Miao X., Wang C., Bai H., Analysis of water hazard types and hydrogeological characteristics of Shendong coal mine, Journal of Mining and Safety Engineering, 27, 3, (2010)
  • [4] Fan L., Ma X., A review on investigation of water-preserved coal mining in western China, International Journal of Coal Science & Technology, 5, 4, pp. 411-416, (2018)
  • [5] Hu Z., Chen C., Xiao W., Et al., Surface movement and deformation characteristics due to high-intensive coal mining in the windy and sandy region, International Journal of Coal Science & Technology, 3, 3, pp. 339-348, (2016)
  • [6] Gu D., Zhang J., Impact of modern coal mining on groundwater environment in western mining area, Coal Science and Technology, 40, 12, pp. 114-117, (2012)
  • [7] Wang L., Wang Z., Huang J., Et al., Prediction on the height of water-flowing fractured zone for shallow seam covered with thin bedrock and thick windblown sands, Journal of Mining & Safety Engineering, 29, 5, pp. 607-612, (2012)
  • [8] Xu J., Zhu W., Wang X., New method to predict the height of fractured water-conducting zone by location of key strata, Journal of China Coal Society, 37, 5, pp. 762-769, (2012)
  • [9] Li W., Wang Q., Liu S., Et al., Study on the creep permeability of mining-cracked N<sub>2</sub> laterite as the key aquifuge for preserving water resources in Northwestern China, International Journal of Coal Science & Technology, 5, 3, pp. 315-327, (2018)
  • [10] Wang S., Huang Q., Fan L., Et al., Study on the characteristics of aquifers and zoning of water-holding mining in ecologically fragile mining areas, Journal of China Coal Society, 35, 1, pp. 7-14, (2010)
123