Continuous commutation failure suppression strategy based on firing angle deviation compensation

被引：0
|
作者：
Zhao J. [1 ]
Li X. [1 ]
Wang Y. [1 ]
Tan Z. [1 ]
Wang J. [1 ]
Cai Z. [1 ]
机构：
[1] School of Electric Power Engineering, South China University of Technology, Guangzhou
来源：
Dianli Zidonghua Shebei/Electric Power Automation Equipment | 2023年 / 43卷 / 03期
基金：
中国国家自然科学基金;
关键词：
asymmetric fault; continuous commutation failure; firing angle deviation; LCC-HVDC power transmission; negative-sequence component;
D O I：
10.16081/j.epae.202209019
中图分类号：
学科分类号：
摘要：
After the asymmetrical fault occurs in the alternating current（AC） system on the inverter side，it is easy to cause continuous commutation failure，which threatens the safe and stable operation of the grid. In order to solve this problem，based on the response law of the high voltage direct current（HVDC） control system after an asymmetric fault，the fault and recovery process is divided into two stages according to the steady-state operation curve of the HVDC system. There is a trend that the commutation area demand gradually increases while the maximum supply of commutation area gradually decreases in Stage 2，i.e. steady fault recovery stage. There is still a deviation between the command value and the actual value of the firing angle during this process，and the deviation of the firing angle will further reduce the maximum supply of the commutation area，which is an important cause of continuous commutation failure. Based on this，the source of firing angle deviation and the influence of firing angle deviation on the HVDC control system are analyzed，and a continuous commutation failure suppression measure based on firing angle deviation compensation is proposed and verified based on the CIGRE HVDC benchmark model in PSCAD／EMTDC. The simulative results show that the proposed measures can effectively suppress the continuous commutation failure. © 2023 Electric Power Automation Equipment Press. All rights reserved.
引用
收藏
页码：210 / 216
页数：6
相关论文
共 19 条
  • [1] ZHAO Sheng, LI Botong, Bin LI, Et al., Influence mechanism of single-phase tripping on commutation process and suppression strategy of continuous commutation failure［J］, Electric Power Automation Equipment, 40, 4, pp. 17-24, (2020)
  • [2] pp. 124-126, (2011)
  • [3] RUAN Siye, Kai XU, LIU Dan, Et al., Statistical analysis and suggestions on resistance measures for commutation failures of HVDC transmission system［J］, Automation of Electric Power Systems, 43, 18, pp. 13-17, (2019)
  • [4] LIU Xiyang, WANG Zengping, ZHENG Bowen, Et al., Mechanism analysis and mitigation measures for continuous commutation failure during the restoration of LCC-HVDC［J］, Proceedings of CSEE, 40, 10, pp. 3163-3171, (2020)
  • [5] JING Liuming, WANG Bin, DONG Xinzhou, Et al., Review of consecutive commutation failure research for HVDC transmission system［J］, Electric Power Automation Equipment, 39, 9, pp. 116-123, (2019)
  • [6] TANG Yi, ZHENG Chenyi, LOU Boliang, Et al., Research on DC power control strategy for mitigating the continuous commutation failure［J］, Power System Technology, 43, 10, pp. 3514-3522, (2019)
  • [7] SONG Shiqi, ZHANG Dairun, GUO Wanxin, Et al., Risk assessment of HVDC system commutation failure caused by harmonic voltage［J］, Power System Technology, 45, 11, pp. 4505-4511, (2021)
  • [8] LIU Lei, LIN Sheng, LIU Jian, Et al., Mechanism analysis of subsequent commutation failure caused by improper interaction of controllers［J］, Power System Technology, 43, 10, pp. 3562-3568, (2019)
  • [9] ZENG Liang, LI Yongli, ZHANG Yunke, Et al., Research on mechanism and control strategy of continuous commutation failures in HVDC system caused by asymmetrical fault in inverter-side AC system［J］, Proceedings of the CSEE, 39, 11, pp. 3159-3168, (2019)
  • [10] LU Yi, TONG Kai, NING Linru, Et al., A method mitigating continuous commutation failure for double-infeed HVDC system based on virtual inductor［J］, Power System Technology, 41, 5, pp. 1503-1509, (2017)
12