Influence of Force Load on Ultrasonic Longitudinal-Torsional Composite Drilling System

被引：0
|
作者：
Chang B. [1 ]
Zhao B. [1 ]
Yuan L. [1 ]
Li P. [1 ]
Zhao C. [1 ]
机构：
[1] School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo
来源：
Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2019年 / 39卷 / 05期
关键词：
Amplitude; Force load; Frequency; Longitudinal-torsional composite; Theoretical model;
D O I：
10.16450/j.cnki.issn.1004-6801.2019.05.029
中图分类号：
学科分类号：
摘要：
In the ultrasonic assisted drilling of titanium alloy machining, to solve the problems of system detuning, amplitude attenuation and even vibration loss after the load is applied to the acoustic system, the theoretical and experimental research on the force load of acoustic system is carried out. The four-terminal network method is used to unify the transducer, the composite horn and the load, and the overall theoretical model of the ultrasonic drilling acoustic system is established. The ANSYS commercial software package is used to simulate the acoustic system with static and dynamic drilling forces. The design covered the mechanical (force-loading) test and actual drilling processing experiment, explored the force load effect on the system characteristics. It is proved that a rise in the force load increases the system input impedance, shifts the resonance frequency, and reduces the system amplification factor. In the ultrasonic drilling of titanium alloy processing, the current is increased by more than 60%, and when the frequency variation/shift exceeds 350Hz, the acoustic system will exhibit significant detuning, which, in turn, will deteriorate the system stability. The research results have certain guidance and reference significance for ultrasonic assisted drilling. © 2019, Editorial Department of JVMD. All right reserved.
引用
收藏
页码：1111 / 1119
页数：8
相关论文
共 16 条
  • [1] Li L., Zhao W., He N., Application of process damping effect in milling of titanium alloy, Journal of Vibration, Measurement & Diagnosis, 6, pp. 1165-1206, (2015)
  • [2] Zhao B., Zhao B., Fan K., Et al., Study on the stability of two dimensional ultrasonic vibration milling system in vertical plane, Journal of Vibration, Measurement & Diagnosis, 3, pp. 617-636, (2017)
  • [3] Pujana J., Rivero A., Celaya A., Et al., Analysis of ultrasonic-assisted drilling of Ti6Al4V, International Journal of Machine Tools & Manufacture, 49, 6, pp. 500-508, (2009)
  • [4] Shao Z., Li Z., Zhang D., Et al., Study on the thrust force and chip in rotary ultrasonic-assisted drilling of titanium alloys (Ti6Al4V), Journal of Mechanical Engineering, 19, pp. 80-86, (2017)
  • [5] Liao Y., Chen Y., Lin H., Feasibility study of the ultrasonic vibration assisted drilling of inconel superalloy, International Journal of Machine Tools & Manufacture, 47, 12, pp. 1988-1996, (2007)
  • [6] Yin X., Xie X., Tian A., Dynamical performance of ultrasonic stepped horn with consideration of loading effect, Journal of Vibration and Shock, 31, 4, pp. 157-161, (2012)
  • [7] Ma J., Zhao B., Ren G., Experimental study on influences of geometric parameters of ultrasonic milling cutter on acoustic system stability, Tool Engineering, 45, 6, pp. 50-52, (2011)
  • [8] Liu Z., Jin Y., Zhao B., Et al., Study on influence of load on acoustic system characteristics of ultrasonic machining, Aviation Precision Manufacturing Technology, 1, pp. 10-13, (2012)
  • [9] Harada K., Sasahara H., Effect of dynamic response and displacement/stress amplitude on ultrasonic vibration cutting, Journal of Materials Processing Technology, 20, 9, pp. 4490-4495, (2009)
  • [10] Zhang Y., Yu J., Wang C., Influence of honing load on resonant frequency of ultrasonic honing vibration system, Acta Acustica, 5, pp. 367-371, (1994)
12