Prediction of railway subgrade subsidence based on geological mining conditions

被引:0
|
作者
Ding Y. [1 ]
Deng N. [1 ]
Yao T. [1 ,2 ]
Liu D. [1 ,2 ]
Shang H. [1 ]
机构
[1] College of Geology and Environment, Xi’an University of Science and Technology, Xi’an
[2] Chongqing 107 Municipal Construction Engineering Co. Ltd, Chongqing
关键词
geological mining conditions; railway coal pressing; subsidence prediction; surface subsidence;
D O I
10.13199/j.cnki.cst.2020-0733
中图分类号
学科分类号
摘要
In order to ensure the safe operation of the special railway line in Guozhuang coal mine, the steady-state prediction of the railway subgrade subsidence caused by working face mining was carried out from the perspective of geological mining conditions.Firstly, a GA-BP neural network model between geological mining conditions and the predicted parameters of probability integral was established.After training using the collected data from the surface mobile observatory station, the accuracy and reliability of the model were tested from four aspects:network error analysis, data fitting degree, test results and generalization performance.The results showed that the convergence rate of the network is fast, the average relative error of the model is less than 3%, the fitting degree of the data is more than 0.8, and the generalization performance index is more than 0.8. The model has high prediction accuracy and good prediction ability.Secondly, based on the parameters of geological mining conditions of each working face in the study area, the model is used to calculate the predicted parameters of mining subsidence.By comparing the estimated mining subsidence results of S3-13 working face with the measured data, it is found that:the sum of squares of the differences between the two values is 6.21×105, and the median error was 104.38 mm, which is 2.60% of the maximum subsidence value of the observation point. The high accuracy of the prediction results indicated that the obtained probability integral predicted parameters have certain reliability.Finally, the final subsidence contour line and subsidence curve of the railway subgrade are estimated through the steady-state prediction. It is estimated that the maximum subsidence value along the railway line is 4 261 mm, and two sections will form a subsidence basin larger than 4 000 mm. The railway will be severely deformed and damaged.The research results can provide a theoretical basis for the mining of the subsequent working face and the prediction and maintenance of the dynamic deformation of the railway. © 2022 The authors.
引用
收藏
页码:135 / 145
页数:10
相关论文
共 20 条
  • [1] SUN Xikui, Present situation and prospect of green filling mining in mines, Coal Science and Technology, 48, 9, pp. 48-55, (2020)
  • [2] (1991)
  • [3] LIU Baochen, DAI Huayang, Research development and origin of Probability Integral Method, Coal Mining Technology, 21, 2, pp. 1-3, (2016)
  • [4] ZHU Xiaojun, GUO Guangli, FANG Qi, Recent progress on parameter inversion of probability integral method [J], Metal Mine, 4, pp. 173-177, (2015)
  • [5] ZHANG Feng, WU Zhicong, ZHANG Yan, TAN Xiuquan, Comprehensive study of parameters of probability integral method of mining subsidence in urban planning areas of Jining City, Coal Science and Technology, 48, 10, pp. 150-157, (2020)
  • [6] ZHA Jianfeng, FENG Wenkai, ZHU Xiaojun, Research on parameters inversion in probability integral method by genetic algorithm, Journal of Mining & Safety Engineering, 28, 4, pp. 655-659, (2011)
  • [7] LI Peixian, WAN Haoming, XU Yue, Et al., Parameter inversion of probability integration method using surface movement vector, Chinese Journal of Geotechnical Engineering, 40, 4, pp. 767-776, (2018)
  • [8] WANG Lei, ZHANG Xianni, CHI Shenshen, Et al., Parameter inversion model for mining subsidence prediction based on fusion of InSAR and GA, Geomatics and Information Science of Wuhan University, 43, 11, pp. 1635-1641, (2018)
  • [9] SHEN Zhen, XU Liangji, LIU Zhe, Et al., Calculating on the prediction parameters of mining subsidence withprobability integral method based on matlab, Metal Mine, 9, pp. 170-174, (2015)
  • [10] YANG Jingyu, LIU Chao, WANG Bin, BFGS method based inversion of parameters in probability integral model, Journal of China Coal Society, 44, 10, pp. 3058-3068, (2019)