Experimental study on bond-slip behavior between encased steel and high-performance-fiber concrete

被引：0
|
作者：
Ming M. [1 ]
Zheng S.-S. [1 ,2 ]
Zheng H. [1 ]
He J.-C. [3 ]
Dong L.-G. [1 ]
Song M.-C. [1 ]
机构：
[1] School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an, 710055, Shaanxi
[2] Key Lab of Structural Engineering and Earthquake Resistance, Ministry of Education (XAUAT), Xi'an, 710055, Shaanxi
[3] Architecture Design and Research Group of Xi'an University of Architecture and Technology, Xi'an, 710055, Shaanxi
来源：
Zheng, Shan-Suo (zhengshansuo@263.net) | 2020年 / Tsinghua University卷 / 37期
关键词：
Bond strength; Effective bond stress; High performance fiber reinforced concrete; Push-out test; Steel reinforced concrete structure;
D O I：
10.6052/j.issn.1000-4750.2019.09.0555
中图分类号：
学科分类号：
摘要：
Ten push-out experimental specimens were cast and tested to study the interfacial bond-slip behavior of section steel and high-performance fiber concrete (HPFC). The main parameters investigated were strength grade, concrete cover thickness and embedded length. The failure process and load-slip (P-S) curves were obtained. The influence regularities of design parameters on the characteristic bond strength were studied, and the formulae of characteristic bond strength were established. The effective bond stress was introduced and deduced. Through the analysis of the whole process of the effective bond stress slip curve, the development of bond stress was obtained. The results show that : the characteristics bond strength were increased by the increase of the concrete cover thickness and the concrete strength; the calculated value of the characteristics bond strength appeared were similar to that of the test values; the effective bond stress reflected the development and transformation of bond stress at the interface between section steel and high-performance-fiber-concrete; the proportional relationship among the components of the bonding force was derived by process analysis. The research provides an experimental support for analyzing the mechanical behaviors of steel reinforced high-performance-fiber-concrete. © 2020, Engineering Mechanics Press. All right reserved.
引用
收藏
页码：148 / 157
页数：9
相关论文
共 24 条
  • [1] Nie Jianguo, Liu Ming, Ye Lieping, Steel-concrete composite structure, (2005)
  • [2] Zhao Hongtie, Design theory of composite structure, (2005)
  • [3] Yong Yang, Yicong Xue, Yu Yunlong, Fengqi Gao, Experimental study on seismic performance of partially precast steel reinforced concrete columns, Engineering Structures, 175, pp. 63-75, (2018)
  • [4] Kumar Pankaj, Patnaik Amar, Chaudhary Sandeep, Effect of bond layer thickness on behaviour of steel-concrete composite connections, Engineering Structures, 177, pp. 268-282, (2018)
  • [5] Chen Zongping, Zheng Huahai, Xun Jinjun, Anchorage design method and interfaces bond behavior of steel encased concrete menber, Journal of Basic Science and Engineering, 3, pp. 596-607, (2015)
  • [6] Lihua Chen, Shiye Wang, Chao Yin, Shutin Li, Experimental study on constitutive relationship between checkered steel and concrete, Construction and Building Materials, 210, pp. 483-498, (2019)
  • [7] Chen L, Dai J, Jin Q, Et al., Refining bond-slip constitutive relationship between checkered steel tube and concrete, Construction and Building Materials, 79, pp. 153-164, (2015)
  • [8] Majdi Y, Hsu C T T, Punurai S, Local bond-slip behavior between cold-formed metal and concrete, Engineering Structures, 69, pp. 271-284, (2014)
  • [9] Jang J G, Kim H K, Kim T S, Et al., Improved flexural fatigue resistance of PVA fiber-reinforced concrete subjected to freezing and thawing cycles, Construction & Building Materials, 59, pp. 129-135, (2014)
  • [10] Asif Jalal, Nasir Shafiq, Ehsan Nikbakht, Et al., Mechanical properties of hybrid basalt-polyvinyl alcohol (PVA) fiber reinforced concrete, Key Engineering Materials, 744, 19, pp. 3-7, (2017)
123